DUMP ONYX BOOX i62M Albatros 2025-11-21

EMMC Device Information :
EMMC CID: 45010053454D303447900471CCB49E65
EMMC CSD: D00F0032 F5903FFFFFFFDFF924040C9
iNAND_SD5D14A-4G @FBGA153
iNAND_SD5D26B-4G @FBGA162
iNAND_SD5D28B-4G @FBGA162
iNAND_SD5DH24A-4G @FBGA153
iNAND_SD5DH26A-4G @FBGA153
iNAND_SD7DP26A-4G @FBGA153
iNAND_SDIN7DP2-4G @FBGA153
Manufacturer: SANDISK , NAME: SEM04G , HEX: 53454D303447 , S/N: 0471CCB4 , Rev: 90
Manufacturer ID: 45 , OEM ID: 00 , Device Type: BGA (Discrete embedded) , Date: 9/2011
EMMC ROM 1 (Main User Data) Capacity: 3776 MB (0x0000EC000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 1024 KB (0x000000100000)
EMMC RPMB Capacity: 128 KB (0x000000020000) , Counter: 0 , Response: Clean
Extended CSD Information :
Extended CSD rev: 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot partition 1 enabled for boot , Boot ACK
Boot Bus Config: 0x02 , x8 (sdr/ddr) bus width in boot operation mode
H/W Reset Function [RST_N_FUNCTION]: 0x00 , RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x03
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Partition settings [PARTITION_SETTING_COMPLETED]: 0x00
EMMC Init completed
Backup saved: SEM04G_0471CCB4_20251120_193503.extcsd (new backup)

Connected successfully

Operation: Scan PartitionTable from Source (Vendor: Binary Read/Write)

Scanning soft partitions from ROM2
GPT header is not found

Scanning soft partitions from ROM3
GPT header is not found

Scanning soft partitions from ROM1
GPT header is not found
MBR header is found
Partition: MBR [000000000000 - 000000000200], Size: 000000000200 (512 B), Type: MBR
Partition: mmcblk0p0 [0000009F8000 - 00001B7F8000], Size: 00001AE00000 (430.00 MB), Type: Linux (/)
Partition: mmcblk0p1 [00001B7F8000 - 00001D7F8000], Size: 000002000000 (32.00 MB), Type: Linux (/root)
Partition: mmcblk0p2 [00001D7F8000 - 0000EC000000], Size: 0000CE808000 (3.23 GB), Type: Fat32
MBR header successfully parsed

Rom: ROM1, Part: mmcblk0p0, FsType: Linux, Mount: Success, MountPoint: /mnt/0000fe01
Rom: ROM1, Part: mmcblk0p1, FsType: Linux, Mount: Success, MountPoint: /mnt/0000fe02
Rom: ROM1, Part: mmcblk0p2, FsType: Fat32, Mount: Success, MountPoint: /mnt/0000fe03

Firmware info not found