Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: FE014E4D4D433032473A5D79134780EB
EMMC CSD: D04F01320F5A1393FFFFFFE38A4000E7
EMMC Manufacture : MICRON , EMMC NAME: MMC02G , HEX: 4D4D43303247 , S/N: 5D791347 , rev. 0x3A
EMMC Manufacture ID: 0xFE , OEM ID: 0x4E , Device Type: BGA (Discrete embedded) , Date: 8/2013
EMMC ROM 1 (Main User Data) Capacity: 1832 MB (000072800000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 1024 KB (000000100000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000) Counter: 0 , Response: Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Тачскрина там нет. Нажатия он понимает от ик лампочек по периметру платы, работает только в собранном виде.
Extended CSD rev: 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG]: 0x00 , Boot from: no boot
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x03
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: MMC02G_5D791347_20250805_192237.extcsd
Setting bus width to 8 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: FE014E4D4D433032473A5D79134780EB
EMMC CSD: D04F01320F5A1393FFFFFFE38A4000E7
EMMC Manufacture : MICRON , EMMC NAME: MMC02G , HEX: 4D4D43303247 , S/N: 5D791347 , rev. 0x3A
EMMC Manufacture ID: 0xFE , OEM ID: 0x4E , Device Type: BGA (Discrete embedded) , Date: 8/2013
EMMC ROM 1 (Main User Data) Capacity: 1832 MB (000072800000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 1024 KB (000000100000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000) Counter: 0 , Response: Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Тачскрина там нет. Нажатия он понимает от ик лампочек по периметру платы, работает только в собранном виде.
Extended CSD rev: 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG]: 0x00 , Boot from: no boot
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x03
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: MMC02G_5D791347_20250805_192237.extcsd
