======================================================
======================================================
eMMC Test Point Connection Module
======================================================
======================================================
1. DO NOT USE THE PHONE"S BATTERY
2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.
Interface Reset OK!
eMMC Access Type: SECTOR MODE
eMMC Supported Voltage Range:
3.5-3.6V, 3.4-3.5V, 3.3-3.4V, 3.2-3.3V, 3.1-3.2V
3.0-3.1V, 2.9-3.0V, 2.8-2.9V, 2.7-2.8V, 1.9-2.0V
CID : 90014A4838473264040502A18EA491A7
CSD : D02701320F5903FFFFFFFFEF8A4040D3
eMMC Boot Information
Revision 1.6 (for MMC v4.5, v4.51)
BOOT PARTITION : BOOT PARTITION 1
PARTITION ACCESS : R/W USER PARTITION
PERM_BOOT_CFG_PROT : DISABLED
PWR_BOOT_CFG_PROT : DISABLED
BOOT MODE : x1 SINGLE DATA RATE + LOW SPEED
RESET BUS WIDTH : ENABLED
eMMC FirmW UPDATE : DISABLED
EMMC CACHE SIZE : 0 KB
SUPER PAGE SIZE : 3072 KB
HC ERASE GROUP SIZE: 512 KB
USER AREA SIZE : 7818182656 BYTES
BOOT PARTITION SIZE: 4096 KB
RPMB PARTITION SIZE: 4096 KB
eMMC Device Information
Manufacturer ID: HYNIX
Device Type : Embedded BGA
Application ID : 4A
Product Name : H8G2d
Product Rev : 0.5
Product SN : 02A18EA4
Manufactured : January 1998
Card Specific Data
CSD_STRUCTURE : Extended
SPEC_VERS : Version 4.1/4.2/4.3
TAAC : 13 ns
TRAN_SPEED : 4000000 KHz
READ_BL_LEN : 512 Bytes
C_SIZE : HIGH CAPACITY
WP_GRP_ENABLE : YES
WRITE_BL_LEN : 512 Bytes
CONTENT_PROT_APP : NO
PERM_WRITE_PROTECT: NO
TMP_WRITE_PROTECT : NO
Extended CSD Saved:
90014A4838473264040502A18EA491A7.ext_csd
Backup Directory:
E:\MOBILE\Box Support\ATF Support\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\
Dumping Custom Region
Please wait for some time...
Partition Selected: USER AREA
(eMMC Clock 5000000 Hz)
Operation Cancelled...
File Saved: E:\MOBILE\Box Support\ATF Support\AdvanceBox Turbo Flasher\eMMC\Recovered\ддд_0x00000000_0x0004A357.bin
Total Elapsed Time 00:04:35
