-
Скачивание файлов платно! Купить Доступ
P5200 новая флешка, не могу создать GP раздел [решено]
- Автор темы Ден396
- Дата начала
- 6/5/12
- 556
- 19
- 16
Здравствуйте.
Для начала, пожалуйста, запостите полный лог Софта с процедурой коннекта и информацией о чипе.
Для начала, пожалуйста, запостите полный лог Софта с процедурой коннекта и информацией о чипе.
Ну вот что получилось:
Connecting...
Device : Samsung eMMC M8G2FB
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB
---------------------------------------------------------------
CID Info
CID : 1501004D3847324642081803FE9F5F0F
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : M8G2FB
Product revision : 0.8
Product serial number : (hex) 1803FE9F
Manufacturing date : 05/2012
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8A404067
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.5 (for MMC v4.41)
Erase block size : 512 Kbytes
Boot1 size : 2048 Kbytes
Boot2 size : 2048 Kbytes
RPMB size : 128 Kbytes
Partition config : 00000000
Boot partition enable : Device not boot enabled (default) (Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/M8G2FB_05_04_2017_18_00_58.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.3.4; FW: 1.16.
P00: GPT (00000000, 00002000)
P01: BOTA0 (00002000, 00001000)
P02: BOTA1 (00003000, 00001000)
P03: EFS (00004000, 0000A000)
P04: PARAM (00012000, 00002000)
P05: RESERVED1 (00014000, 00001800)
P06: DNX (00015800, 00000800)
P07: OTA (00016000, 00004000)
P08: BOOT (0001A000, 0000A000)
P09: RECOVERY (00024000, 0000A000)
P10: RESERVED3 (0002E000, 00002000)
P11: CONFIG (00030000, 00008000)
P12: FACTORY (00038000, 00001000)
P13: MEDIA (00039000, 00001000)
P14: RESERVED2 (0003A000, 00002000)
P15: CARRIER (0003C000, 00002000)
P16: TDATA (0003E000, 00002000)
P17: PERSDATA (00040000, 00006000)
P18: SYSTEM (00046000, 0049C000)
P19: HIDDEN (004E2000, 00032000)
P20: CACHE (00514000, 000AF000)
P21: USERDATA (005C3000, 01790000)
General Purpose Partition 1:
size: 40 MB
enhanced attribute is set
write reliablity is set
General Purpose Partition 2:
size: NONE
enhanced attribute is not set
write reliablity is set
General Purpose Partition 3:
size: NONE
enhanced attribute is not set
write reliablity is set
General Purpose Partition 4:
size: NONE
enhanced attribute is not set
write reliablity is set
Enhanced user data area partition:
size: 40 MB
start: 0 b
write reliablity is set
Creating HW partitions succesfully complete!
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : GT-P5210
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/SAMSUNG_GT-P5210_EMMC_MAG2GC_16GB.srf
Voltage : 1.8V
Bus Mode : 1
Bus speed : 12
Connecting...
Device : Samsung eMMC M8G2FB
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB
---------------------------------------------------------------
CID Info
CID : 1501004D3847324642081803FE9F5F0F
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : M8G2FB
Product revision : 0.8
Product serial number : (hex) 1803FE9F
Manufacturing date : 05/2012
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8A404067
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.5 (for MMC v4.41)
Erase block size : 512 Kbytes
Boot1 size : 2048 Kbytes
Boot2 size : 2048 Kbytes
RPMB size : 128 Kbytes
Partition config : 00000000
Boot partition enable : Device not boot enabled (default) (Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x3
Part setting completed: 0x1
GP partition 1 size : 40 MB
GP partition 2 size : 832 MB
GP partition 3 size : 832 MB
GP partition 4 size : 832 MB
Enhanced area size : (0x2800000) 40 MB
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/M8G2FB_05_04_2017_18_13_19.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.3.4; FW: 1.16.
Erasing. Please wait... error!
ERROR[013]: Erase error.
Attempting to erase...
error!
Disconnected.
Теперь флешке кирдык, не стирает, не пишет.
Connecting...
Device : Samsung eMMC M8G2FB
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB
---------------------------------------------------------------
CID Info
CID : 1501004D3847324642081803FE9F5F0F
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : M8G2FB
Product revision : 0.8
Product serial number : (hex) 1803FE9F
Manufacturing date : 05/2012
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8A404067
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.5 (for MMC v4.41)
Erase block size : 512 Kbytes
Boot1 size : 2048 Kbytes
Boot2 size : 2048 Kbytes
RPMB size : 128 Kbytes
Partition config : 00000000
Boot partition enable : Device not boot enabled (default) (Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/M8G2FB_05_04_2017_18_00_58.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.3.4; FW: 1.16.
P00: GPT (00000000, 00002000)
P01: BOTA0 (00002000, 00001000)
P02: BOTA1 (00003000, 00001000)
P03: EFS (00004000, 0000A000)
P04: PARAM (00012000, 00002000)
P05: RESERVED1 (00014000, 00001800)
P06: DNX (00015800, 00000800)
P07: OTA (00016000, 00004000)
P08: BOOT (0001A000, 0000A000)
P09: RECOVERY (00024000, 0000A000)
P10: RESERVED3 (0002E000, 00002000)
P11: CONFIG (00030000, 00008000)
P12: FACTORY (00038000, 00001000)
P13: MEDIA (00039000, 00001000)
P14: RESERVED2 (0003A000, 00002000)
P15: CARRIER (0003C000, 00002000)
P16: TDATA (0003E000, 00002000)
P17: PERSDATA (00040000, 00006000)
P18: SYSTEM (00046000, 0049C000)
P19: HIDDEN (004E2000, 00032000)
P20: CACHE (00514000, 000AF000)
P21: USERDATA (005C3000, 01790000)
General Purpose Partition 1:
size: 40 MB
enhanced attribute is set
write reliablity is set
General Purpose Partition 2:
size: NONE
enhanced attribute is not set
write reliablity is set
General Purpose Partition 3:
size: NONE
enhanced attribute is not set
write reliablity is set
General Purpose Partition 4:
size: NONE
enhanced attribute is not set
write reliablity is set
Enhanced user data area partition:
size: 40 MB
start: 0 b
write reliablity is set
Creating HW partitions succesfully complete!
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : GT-P5210
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/SAMSUNG_GT-P5210_EMMC_MAG2GC_16GB.srf
Voltage : 1.8V
Bus Mode : 1
Bus speed : 12
Connecting...
Device : Samsung eMMC M8G2FB
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB
---------------------------------------------------------------
CID Info
CID : 1501004D3847324642081803FE9F5F0F
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : M8G2FB
Product revision : 0.8
Product serial number : (hex) 1803FE9F
Manufacturing date : 05/2012
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8A404067
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.5 (for MMC v4.41)
Erase block size : 512 Kbytes
Boot1 size : 2048 Kbytes
Boot2 size : 2048 Kbytes
RPMB size : 128 Kbytes
Partition config : 00000000
Boot partition enable : Device not boot enabled (default) (Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x3
Part setting completed: 0x1
GP partition 1 size : 40 MB
GP partition 2 size : 832 MB
GP partition 3 size : 832 MB
GP partition 4 size : 832 MB
Enhanced area size : (0x2800000) 40 MB
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/M8G2FB_05_04_2017_18_13_19.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.3.4; FW: 1.16.
Erasing. Please wait... error!
ERROR[013]: Erase error.
Attempting to erase...
error!
Disconnected.
Теперь флешке кирдык, не стирает, не пишет.
- 6/5/12
- 556
- 19
- 16
Мы отправили вам свои контакты в ПМ, чтобы вы связались с нами с Скайп для более детального исследования проблемы.
Все что Вам надо для исследования проблемы у Вас есть. Я написал с просьбой научить создавать разделы. Порядок действия, алгоритм. Попросили лог, я скинул. Это форум, есть вероятность, что не только я могу столкнуться с такой проблемой, так что будем решать тут, что бы решение было тут.
- 6/5/12
- 556
- 19
- 16
Для создания разделов, сделайте следующее:
1. Перейдите на вкладку "eMMC service", и откройте окно с опциями "HW Partitions".
2. Установите (выберите) нужные размеры "GP partition 1-4" и проставьте галочки на соответствующих опциях "ENH_ATTR". "WR_REL" значения оставьте выбранными (по умолчанию).
3. Уcтановите нужный размер "User Enhanced size" и стартовый адреc "User Enhanced start". Если нужно, установить "WIRE_REL_SER".
4. Нажать кнопку "Write to EXT_CSD".
Так же, Вы должны помнить, что GPx разделы создаются один раз и не меняются после создания. Размер GPx разделов отнимается от раздела User Area.
При создании GPx разделов, Ви сделали все правильно:
но при выборе значения "NONE" для размеров Partition 2, Partition 3 и Partition 4 софт установил значения регистров по умолчанию (832 MB) вместо 0:
В последней версии софта (1.3.5), мы исправили данную проблему. Вы можете попробовать сделать заводское форматирование ("Factory format") на вкладке "eMMC service" (при заводском форматировании eMMC Samsung настройки GPx слетят) и затем попытаться создать нужные GPx разделы снова . Так же имейте в виду, что при заводском форматировании eMMC Samsung настройки eMMC слетят до установок по умолчанию и если нужно, установите необходимую геометрию чипа (размеры Boot1, Boot2, RPMB).
- 6/5/12
- 556
- 19
- 16
Здравствуйте.
Да, пробуйте от Р5210.
Да, пробуйте от Р5210.
Похожие Темы
-
Samsung S21 5G SM-G9910 не видит сим карту
- Автор Egor13
- Ответы: 17
-
-
-
Note 4 MTK 2/16, не включается WiFi, не могу прочитать IMEI (после свапа пары CPU/EMMC)
- Автор aykalinichenko
- Ответы: 8
-