- #1
Автор Темы
Доброго времени суток, пытаюсь прошить тело фениксом и жафом, тело рабочее нужно повысить до v.10. инфу тело считывает, но при нажатии прошить, тело должно уйти в локал, а тело перезагружаться и опять включается. А при подсоединении тела к компу, постоянно выскакивает автозапуск " Portable Device". Мне так кажется тело из за этой проги не может войти в локал. Антивирус и РСсюит выключены.
это пишет с феникса:
Flashing started
Creating product data items list
Product data items list created
Backup not required
Starting to recover the phone
Recoverying phone
Initializing
Scanning image files...
Unable to set the phone to flash mode. Unable to flash.
Getting BB5 Phone Information from Update Server...
Asic CMT: Verifying communication to device...
Waiting for communication response: 2
Waiting for communication response: 1
ERROR: Unable to detect device 0x8401F121. Check USB connection
Unable to get phone info from update server 0x8401F121
Unable to get phone information from Update Server
Flashing phone
Initializing
Verifying communication to device...
Scanning image files...
ERROR: Failed to set phone to flashmode
При попытке принудительно загнать в локал выдает:
The mode setting request failed.
There were problems in communication with the product. Check that the product is connected properly and that the connection has been established.
HRESULT 0x80042007 (-2147213305)
DTL Messaging: Data send failed. DTL Back-End error code = 0x8400A4AD. Could not send data to the driver, reason: 0x8400440E. Common USB DCM: Connection to device lost, check that the cable is properly plugged and the device's power is on.Extended driver error info: (null).
Connection: Driver message send failed;MTI32=0x8004201d
PNMsgIO: Message send timeout, no OnSent event;MTI32=0x80042007
CMtcFN::TryReadProductMode, failed;MTCFN=0x80042007
CMtcFN::RefreshMode, failed;MTCFN=0x80042007
Подскажите как тело вогнать в локал и избавится от автозапуска??????????
это пишет с феникса:
Flashing started
Creating product data items list
Product data items list created
Backup not required
Starting to recover the phone
Recoverying phone
Initializing
Scanning image files...
Unable to set the phone to flash mode. Unable to flash.
Getting BB5 Phone Information from Update Server...
Asic CMT: Verifying communication to device...
Waiting for communication response: 2
Waiting for communication response: 1
ERROR: Unable to detect device 0x8401F121. Check USB connection
Unable to get phone info from update server 0x8401F121
Unable to get phone information from Update Server
Flashing phone
Initializing
Verifying communication to device...
Scanning image files...
ERROR: Failed to set phone to flashmode
При попытке принудительно загнать в локал выдает:
The mode setting request failed.
There were problems in communication with the product. Check that the product is connected properly and that the connection has been established.
HRESULT 0x80042007 (-2147213305)
DTL Messaging: Data send failed. DTL Back-End error code = 0x8400A4AD. Could not send data to the driver, reason: 0x8400440E. Common USB DCM: Connection to device lost, check that the cable is properly plugged and the device's power is on.Extended driver error info: (null).
Connection: Driver message send failed;MTI32=0x8004201d
PNMsgIO: Message send timeout, no OnSent event;MTI32=0x80042007
CMtcFN::TryReadProductMode, failed;MTCFN=0x80042007
CMtcFN::RefreshMode, failed;MTCFN=0x80042007
Подскажите как тело вогнать в локал и избавится от автозапуска??????????
