Analyze JTAG Chain
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.18, JTAG Manager Version: 1.25
Selected Resurrector: [MSM6XXX L06 D02]
Connecting to the target...OK
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x100DF0E1, IR Length = 0x04 bits
Total IR length: 0x0004 bits
Лог скрипта
Open serial port...OK
Connecting to the RIFF Box...OK
Executing Script: [mjnand_1cs.cmm]
WARNING (Line 38, File: [jnand_msm_init_1cs.cmm]): SYSTEM.OPTION parameter [CFLUSH] is ignored.
WARNING (Line 40, File: [jnand_msm_init_1cs.cmm]): SYSTEM.OPTION parameter [ENRESET] is ignored.
WARNING (Line 41, File: [jnand_msm_init_1cs.cmm]): SYSTEM.OPTION parameter [WAITRESET] is ignored.
WARNING (Line 43, File: [jnand_msm_init_1cs.cmm]): SYSTEM.OPTION parameter [BIGENDIAN] is ignored.
WARNING (Line 51, File: [jnand_msm_init_1cs.cmm]): SYSTEM.OPTION parameter [DisMode] is ignored.
WARNING (Line 31, File: [setupsystem.cmm]): SYSTEM.OPTION parameter [CFLUSH] is ignored.
WARNING (Line 33, File: [setupsystem.cmm]): SYSTEM.OPTION parameter [ENRESET] is ignored.
WARNING (Line 34, File: [setupsystem.cmm]): SYSTEM.OPTION parameter [WAITRESET] is ignored.
WARNING (Line 36, File: [setupsystem.cmm]): SYSTEM.OPTION parameter [DACR] is ignored.
WARNING (Line 37, File: [setupsystem.cmm]): SYSTEM.OPTION parameter [BIGENDIAN] is ignored.
WARNING (Line 42, File: [setupsystem.cmm]): SYSTEM.OPTION parameter [ShowError] is ignored.
WARNING (Line 45, File: [setupsystem.cmm]): SYSTEM.OPTION parameter [DisMode] is ignored.
Target (Id = 0x100D00E1) is attached.
Target (Id = 0x100D00E1) is halted at PC = 0xFFFF0000
ERROR: Wrong response from the RIFF Box.
