Без тестовой:
Older phones with unlocked EROM area:
· Connect the phone to the cable and select Normal boot.
· Attach Cruiser to the phone.
· Go to the Security RSA page and replace the certificate by Brown CID49. Remove battery when asked by Cruiser. If this process fails, the phone has a locked-down EROM area and therefore it cannot be converted to Brown CID49.
· Now press the Direct Unlock button.
Newer phones with locked-down EROM area:
· Be sure to have installed the latest Cruiser firmware restoral package from our support area.
· Connect the phone to the cable and select Normal boot.
· Attach Cruiser to the phone.
· Go to the Security RSA page and press the Unlock RSA button. Remove battery when asked by Cruiser.
This will overwrite part of main firmware by special code thus causing the phone to appear "dead".
· Reinsert the battery and reattach Cruiser to the phone.
· Go to the Security RSA page and press the Restore firmware button. Cruiser will search for a restore file then. If it cannot be found, you will also have to reflash main FW and raw FS and to customize the phone.
· Now go to the Locks page and press the Direct unlock button. Remember, if you encounter any new firmware it is wise to make a security zone backup too (or a full GDFS backup).
С тестовой:
Note: This method works for newer K600, K608, V600, W550, W600 and W900 phones. It doesn't work with W810/Z530 phones.
· Connect the phone to the cable and select Normal boot, any CID, use TP.
· Attach Cruiser to the phone using TP.
· Replace the certificate by Brown CID49.
· Reattach the phone without testpoint by selecting Normal boot and press the Repair EROM button.
· Now press the Direct Unlock button.
