ATF перестал шить по USB, инфу читает, backup выполняет,а прошивать не хочет после обновления. до этого не было проблем. С начала С7,теперь С5-03 отказался прошивать. Подскажите в чём проблема?
START FLASHING
CMT Secondary Loader: C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\
BB5_USBLoaders\RAPUv11_2nd.fg
Secondary Loader Sent....
ERROR: MCU_CONFIGURATION_RESPONSE is not VALID
TIPS:
1. Make Sure your Battery Power is Enough...
2. Make Sure Connectivity Drivers are installed...
3. DO NOT USE USB HUBS...
4. Use an ORIGINAL NOKIA CA-101D USB Cable...
Flashing Failed....
Booting/Flashing Failed...
Please Try Again...
START FLASHING
CMT Secondary Loader: C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\
BB5_USBLoaders\RAPUv11_2nd.fg
Secondary Loader Sent....
ERROR: MCU_CONFIGURATION_RESPONSE is not VALID
TIPS:
1. Make Sure your Battery Power is Enough...
2. Make Sure Connectivity Drivers are installed...
3. DO NOT USE USB HUBS...
4. Use an ORIGINAL NOKIA CA-101D USB Cable...
Flashing Failed....
Booting/Flashing Failed...
Please Try Again...