- #1
Автор Темы
Z3X BOX:
BACKUP INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Press 'Read EFS' button to read backup or 'Write EFS' to restore.
To backup/restore QCN, phone diagnostic port must be enabled.
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and select 'DM/DUN over HSIC'.
4. Connect phone to PC with USB cable, install drivers if needed.
5. Choose diagnostic port in port settings.
6. Press 'Read QCN' button to read NV backup or 'Write QCN' to restore.
Operation: Read EFS
Selected model: GT-I9200
Selected port: COM11 SAMSUNG Mobile USB Serial Port ,
Software version: 20.5
Waiting ADB device... OK
Reading phone info...
Model: GT-I9200
Android version: 4.2.2
Product code: GT-I9200ZWEBRI
Phone version: I9200ZTUCNG1
PDA version: I9200ZTUCNG1
CSC version: I9200ZZTCNG1
CSC country code: Taiwan
CSC sales code: BRI
HW version: MP 0.900
Phone S/N: RF1D828AHRE
Modem board: MSM8230AB
RF cal date: 2013.08.10
IMEI: 357777051539221
Checking Super user right... false
This model not supported for auto root
Done with Samsung Tool v.20.5
Root-права включаю из PhilZ-рековери согласно инструкции с форума четырепыдыа (
SuperSU ставлю с apk-шки, затем она сама обновляет бинарник.
При проверке root-прав на устройстве прогой root-checker имею: ADB shell setting for standart access, stored in default.prop, is configured as: shell (non root) user - ro.secury=1
Еще раз впроделываю все операции в рекавери, проверяю настройки андроида и superSU, получаю:
BACKUP INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Press 'Read EFS' button to read backup or 'Write EFS' to restore.
To backup/restore QCN, phone diagnostic port must be enabled.
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and select 'DM/DUN over HSIC'.
4. Connect phone to PC with USB cable, install drivers if needed.
5. Choose diagnostic port in port settings.
6. Press 'Read QCN' button to read NV backup or 'Write QCN' to restore.
Operation: Read EFS
Selected model: GT-I9200
Selected port: COM9 Z3X BOX Serial Port,
Software version: 20.5
Waiting ADB device... OK
Reading phone info...
Model: GT-I9200
Android version: 4.2.2
Product code: GT-I9200ZWEBRI
Phone version: I9200ZTUCNG1
PDA version: I9200ZTUCNG1
CSC version: I9200ZZTCNG1
CSC country code: Taiwan
CSC sales code: BRI
HW version: MP 0.900
Phone S/N: RF1D828AHRE
Modem board: MSM8230AB
RF cal date: 2013.08.10
IMEI: 357777051539221
Checking Super user right... false
This model not supported for auto root
Done with Samsung Tool v.20.5
Что я делаю не так, подскажите ?
BACKUP INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Press 'Read EFS' button to read backup or 'Write EFS' to restore.
To backup/restore QCN, phone diagnostic port must be enabled.
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and select 'DM/DUN over HSIC'.
4. Connect phone to PC with USB cable, install drivers if needed.
5. Choose diagnostic port in port settings.
6. Press 'Read QCN' button to read NV backup or 'Write QCN' to restore.
Operation: Read EFS
Selected model: GT-I9200
Selected port: COM11 SAMSUNG Mobile USB Serial Port ,
Software version: 20.5
Waiting ADB device... OK
Reading phone info...
Model: GT-I9200
Android version: 4.2.2
Product code: GT-I9200ZWEBRI
Phone version: I9200ZTUCNG1
PDA version: I9200ZTUCNG1
CSC version: I9200ZZTCNG1
CSC country code: Taiwan
CSC sales code: BRI
HW version: MP 0.900
Phone S/N: RF1D828AHRE
Modem board: MSM8230AB
RF cal date: 2013.08.10
IMEI: 357777051539221
Checking Super user right... false
This model not supported for auto root
Done with Samsung Tool v.20.5
Root-права включаю из PhilZ-рековери согласно инструкции с форума четырепыдыа (
SuperSU ставлю с apk-шки, затем она сама обновляет бинарник.
При проверке root-прав на устройстве прогой root-checker имею: ADB shell setting for standart access, stored in default.prop, is configured as: shell (non root) user - ro.secury=1
Еще раз впроделываю все операции в рекавери, проверяю настройки андроида и superSU, получаю:
BACKUP INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Press 'Read EFS' button to read backup or 'Write EFS' to restore.
To backup/restore QCN, phone diagnostic port must be enabled.
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and select 'DM/DUN over HSIC'.
4. Connect phone to PC with USB cable, install drivers if needed.
5. Choose diagnostic port in port settings.
6. Press 'Read QCN' button to read NV backup or 'Write QCN' to restore.
Operation: Read EFS
Selected model: GT-I9200
Selected port: COM9 Z3X BOX Serial Port,
Software version: 20.5
Waiting ADB device... OK
Reading phone info...
Model: GT-I9200
Android version: 4.2.2
Product code: GT-I9200ZWEBRI
Phone version: I9200ZTUCNG1
PDA version: I9200ZTUCNG1
CSC version: I9200ZZTCNG1
CSC country code: Taiwan
CSC sales code: BRI
HW version: MP 0.900
Phone S/N: RF1D828AHRE
Modem board: MSM8230AB
RF cal date: 2013.08.10
IMEI: 357777051539221
Checking Super user right... false
This model not supported for auto root
Done with Samsung Tool v.20.5
Что я делаю не так, подскажите ?
Последнее редактирование:
