- #1
Автор Темы
Разбираюсь с рифом.
Массово потащили дохлые дизаеры.
В основном не конектятся при загрузки проги в память при ризуректе.
А сегодня попался полудохлик - прога грузится, но дальше ошибка - подкажите это програмно лечится или память под замену?
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [HTC DesireV (PL1110000) V1.0.4800.54829]
Connecting to the dead body...OK
Detected dead body ID: 0x106220E1 - CORRECT!
Set I/O Voltage reads as 2.62V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip, ID: 0x0065/0x646F (M MORN, 0x000008000000 Bytes = 128.00 MB)
ERROR: Read Failed with Error Code: 0x46. Terminating at 0x000002E73800
Flashing the dead body...
ERROR: DCC Loader has reported Error Code = 0x46 (0x000000). Trying to recover...FAILED
ERROR: Failed due to multiple communication errors. Terminating at 0x000005000200
Массово потащили дохлые дизаеры.
В основном не конектятся при загрузки проги в память при ризуректе.
А сегодня попался полудохлик - прога грузится, но дальше ошибка - подкажите это програмно лечится или память под замену?
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [HTC DesireV (PL1110000) V1.0.4800.54829]
Connecting to the dead body...OK
Detected dead body ID: 0x106220E1 - CORRECT!
Set I/O Voltage reads as 2.62V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip, ID: 0x0065/0x646F (M MORN, 0x000008000000 Bytes = 128.00 MB)
ERROR: Read Failed with Error Code: 0x46. Terminating at 0x000002E73800
Flashing the dead body...
ERROR: DCC Loader has reported Error Code = 0x46 (0x000000). Trying to recover...FAILED
ERROR: Failed due to multiple communication errors. Terminating at 0x000005000200
