Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung I545 V1.0.5067.52868]
Connecting to the dead body...OK
Detected dead body ID: 0x2071B0E1 - CORRECT!
Set I/O Voltage reads as 1.83V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip, ID: 0x0011/0x0100 (016G94, 0x0003AB400000 Bytes = 14.68 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0011/0x0100 (016G94, 0x000000400000 Bytes = 4.00 MB)
Selected Resurrection Data for the eMMC Chip with Capacity = 14,68GB
Flashing the dead body...
ERROR: DCC Loader has reported Error Code = 0x22 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x22 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x22 (0x000000). Trying to recover...OK
ERROR: Stopped due to multiple communication errors. Terminating at 0x0003AB3FBE00
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung I545 V1.0.5067.52868]
Connecting to the dead body...OK
Detected dead body ID: 0x2071B0E1 - CORRECT!
Set I/O Voltage reads as 1.83V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip, ID: 0x0011/0x0100 (016G94, 0x0003AB400000 Bytes = 14.68 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0011/0x0100 (016G94, 0x000000400000 Bytes = 4.00 MB)
Selected Resurrection Data for the eMMC Chip with Capacity = 14,68GB
Flashing the dead body...
ERROR: DCC Loader has reported Error Code = 0x22 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x22 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x22 (0x000000). Trying to recover...OK
ERROR: Stopped due to multiple communication errors. Terminating at 0x0003AB3FBE00
