HTC Desire X PM66100 нет соединения

[Aerlex]

При анализе цепочки
Connecting to the target...OK
WARNING: Embedded I/O Voltage is overriden to 3.15V
Set I/O Voltage reads as 3.15V, TCK Frequency is RTCK

Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x00000000, IR Length = 0x01 bits
Device on TAP #1: ID = 0x000000FE, IR Length = 0x01 bits
Device on TAP #2: ID = 0x00000000, IR Length = 0x01 bits
Device on TAP #3: ID = 0x00000000, IR Length = 0x01 bits
Device on TAP #4: ID = 0x00000000, IR Length = 0x01 bits
Device on TAP #5: ID = 0x00000000, IR Length = 0x01 bits
Device on TAP #6: ID = 0x00000000, IR Length = 0x01 bits
Device on TAP #7: ID = 0x00000000, IR Length = 0x01 bits
Device on TAP #8: ID = 0x00000000, IR Length = 0x01 bits
Device on TAP #9: ID = 0x00000000, IR Length = 0x01 bits
Device on TAP #10: ID = 0x00000000, IR Length = 0x01 bits
Device on TAP #11: ID = 0x00000000, IR Length = 0x01 bits
Device on TAP #12: ID = 0x00000000, IR Length = 0x01 bits
Device on TAP #13: ID = 0x00000000, IR Length = 0x01 bits
Device on TAP #14: ID = 0x00000000, IR Length = 0x01 bits
Device on TAP #15: ID = 0x00000000, IR Length = 0x01 bits
Device on TAP #16: ID = 0x00000000, IR Length = 0x01 bits
Total IR length: 0x001A bits
При resurrection
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.51
Selected Resurrector: [HTC Desire X (PM6610000) V1.0.4841.63397]

Connecting to the dead body...FAILED
None is detected.
Как победить?

 

[spamer45]

купите доступ для просмотра контента

ну и проверить пайку
прикрепить лог с кнопок "ПРОЧИТАТЬ ID" И "анализ цепочки"

 

[Aerlex]

продолжение в понедельник будет. последний раз, ругался на флешь, не распознанная.