HTC One s PJ40100 не восстанавливается

[dimasby]

HTC One s PJ40100 не восстанавливается
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.51
Selected Resurrector: [HTC OneS (PJ4010000) V1.0.4734.57977]

Connecting to the dead body...OK
Detected dead body ID: 0x407950E1 - IGNORED!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 3 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...FAILED
ERROR: Read/Write memory failed during H/W Init

 

[Nicolayer]

СНАЧАЛА - расскажите историю тела,
далее-
дайте 2 лога - "Reset the Target" и "Read Memory"(произвольной длины)

 

[dimasby]

Тело со слов клиента здохло при обновлении.
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.51
Selected Resurrector: [HTC OneS (PJ4010000) V1.0.4734.57977]

Resetting target...OK
STATUS: Target was already halted.

R0 = 0x00000000 R6 = 0x00000000 R12 = 0x00000000
R1 = 0x00000000 R7 = 0x00000000 R13 = 0x0002DF5C
R2 = 0x00000000 R8 = 0x0002419C R14 = 0x00006730
R3 = 0x00000000 R9 = 0x00002254 R15 = 0x00000C40
R4 = 0x00000000 R10 = 0x00000000 CPSR = 0x200000D3
R5 = 0x00000000 R11 = 0x00000000
второй лог :
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.51
Selected Resurrector: [HTC OneS (PJ4010000) V1.0.4734.57977]

Reading Target Memory...OK
Completed in 00:00:00.078 (Average Transfer Rate: 0.70 kB/s)
Saved OK

 

[Nicolayer]

второй, где чтение - вкладка DCC, длина например 0х 0020 0000.