- #1
Автор Темы
Всем добрый вечер... телефон пришел с проблемой нет подсветки дисплея и не работают кнопки... после замены V3101 и L3103 подсветка появилась. Но не работали кнопки 1,3,6, и кнопка на которой планета нарисована пробовал прожигать не помогло заменил проц тел запускался до заставки и отрубался я его перепрошил сделал костомизацию тело ожило но теперь не знаю как его разлочить (пишет insert correct sim card) подскажите кто знает как его разлочить UFSом пробовал не помогло а при попытке разлочить Omnius_for_SE_v0.01 выдает такое посстояно сколько не передергивал АКБ и АКБ зарядил на 100%
13:15:29 Unlock network ock by reset
Unlocks the phone network lock by reset (up to OTP CID 53).
13:15:29 Selected phone type:
13:15:29 Selected connection method:
_ 13:15:29 Instructions
1. Make sure the phone battery is charged to at least 50%.
2. Switch off the phone!
3. Remove the phone battery and wait at least 5 seconds before reinserting it!
4. Press and hold buttons 2 and 5, then connect the cable to the phone!
13:15:39 Connecting via Generic EMP USB Flash Device (USB1)...
13:15:39 Device driver version: 1.1.0.12
13:15:39 Entering baseband CPU service mode...
13:15:39 Detected chipset: DB2020 '9900
13:15:39 Boot mode: ROM
13:15:39 Sending loader...
13:15:40 Flash chip manufacturer: Intel
13:15:40 Flash chip ID: 897E
13:15:40 IMEI: 35934601815044
13:15:40 OTP CID: 51
13:15:40 OTP area status: Locked
13:15:40 Product type: Retail
13:15:40 Effective CID: 53
13:15:40 Effective color: Red
13:15:40 Restarting phone ...
_ 13:15:42 Instructions
1. Make sure the phone battery is charged to at least 50%.
2. Switch off the phone!
3. Remove the phone battery and wait at least 5 seconds before reinserting it!
4. Press and hold buttons 2 and 5, then connect the cable to the phone!
13:15:29 Unlock network ock by reset
Unlocks the phone network lock by reset (up to OTP CID 53).
13:15:29 Selected phone type:
13:15:29 Selected connection method:
_ 13:15:29 Instructions
1. Make sure the phone battery is charged to at least 50%.
2. Switch off the phone!
3. Remove the phone battery and wait at least 5 seconds before reinserting it!
4. Press and hold buttons 2 and 5, then connect the cable to the phone!
13:15:39 Connecting via Generic EMP USB Flash Device (USB1)...
13:15:39 Device driver version: 1.1.0.12
13:15:39 Entering baseband CPU service mode...
13:15:39 Detected chipset: DB2020 '9900
13:15:39 Boot mode: ROM
13:15:39 Sending loader...
13:15:40 Flash chip manufacturer: Intel
13:15:40 Flash chip ID: 897E
13:15:40 IMEI: 35934601815044
13:15:40 OTP CID: 51
13:15:40 OTP area status: Locked
13:15:40 Product type: Retail
13:15:40 Effective CID: 53
13:15:40 Effective color: Red
13:15:40 Restarting phone ...
_ 13:15:42 Instructions
1. Make sure the phone battery is charged to at least 50%.
2. Switch off the phone!
3. Remove the phone battery and wait at least 5 seconds before reinserting it!
4. Press and hold buttons 2 and 5, then connect the cable to the phone!
