- #1
Автор Темы:
volshebnik123
Тут написано что народ менял
В Z3X EasyJtag Software ver. 2.9.0.2 во вкладке eMMC Boot Cfg при нажатии write ничего не происходит
В EasyJtag Plus пытается что-то писать но выкидывает ошибку
Z3X EasyJtag Software ver. 2.9.0.2
Loading eMMC GEN1 Firmware... IO: 3300 mV
Box S/N: 17FF7007032C87B2, ,FW Ver.: 01.62
Напряжение подтяжки линии CMD :3269 mV
Напряжение активной линии CMD :3351 mV
Box IO Level:3300 mV
CLK Rate:21000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
SD Card Information
SD CID : 1B534D454231515430ED7255ED012158
SD CSD : 400E00325B590000EE7F7F800A404054
SD Manufacturer ID: 001B , OEM ID: 534D
SD Date: 01/2018 Rev.0x30
SD NAME: EB1QT , S/N: 3983693293
SD NAME (HEX): 45423151542000
SD Capacity: 30528 MB
SD Permanent Write Protection: No
SD Temporary Write Protection: No
SD Password Locked: No
Partition table scan:
GPT: not present
Found invalid GPT and valid MBR; converting MBR to GPT format
Detected 1 meta partitions :
Meta partition 0
Real (Hardware) Disk/Image size: 3BA0000 sectors 29.8 GiB
Soft (Partitioned) Disk/Image size: 3B9FFBC sectors 29.8 GiB
Logical sector size: 0x200 bytes
Disk identifier (GUID): 81B3107D-F325-E724-B14D-6D12F7AE27E0
First usable sector: 34
Last usable sector: 62521310
Found Data areas (firmware parts) count is: 1
Partition info successfully found
---------------------------------------------
P0 (PARTITION_P0C) [0x400000 0x773c00000] Size: 29.808GB
В Z3X EasyJtag Software ver. 2.9.0.2 во вкладке eMMC Boot Cfg при нажатии write ничего не происходит
В EasyJtag Plus пытается что-то писать но выкидывает ошибку
Z3X EasyJtag Software ver. 2.9.0.2
Loading eMMC GEN1 Firmware... IO: 3300 mV
Box S/N: 17FF7007032C87B2, ,FW Ver.: 01.62
Напряжение подтяжки линии CMD :3269 mV
Напряжение активной линии CMD :3351 mV
Box IO Level:3300 mV
CLK Rate:21000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
SD Card Information
SD CID : 1B534D454231515430ED7255ED012158
SD CSD : 400E00325B590000EE7F7F800A404054
SD Manufacturer ID: 001B , OEM ID: 534D
SD Date: 01/2018 Rev.0x30
SD NAME: EB1QT , S/N: 3983693293
SD NAME (HEX): 45423151542000
SD Capacity: 30528 MB
SD Permanent Write Protection: No
SD Temporary Write Protection: No
SD Password Locked: No
Partition table scan:
GPT: not present
Found invalid GPT and valid MBR; converting MBR to GPT format
Detected 1 meta partitions :
Meta partition 0
Real (Hardware) Disk/Image size: 3BA0000 sectors 29.8 GiB
Soft (Partitioned) Disk/Image size: 3B9FFBC sectors 29.8 GiB
Logical sector size: 0x200 bytes
Disk identifier (GUID): 81B3107D-F325-E724-B14D-6D12F7AE27E0
First usable sector: 34
Last usable sector: 62521310
Found Data areas (firmware parts) count is: 1
Partition info successfully found
---------------------------------------------
P0 (PARTITION_P0C) [0x400000 0x773c00000] Size: 29.808GB