Принесли в ремонт lg D290N не включайка с убитым софтом, попробовал подключить к medusa pro и тут начались проблемы софта то железа программатора короче не известно.
при первом подключении напрямую к памяти отказывался подключаться
Welcome to Medusa Pro Software version 1.2.3.
Started.
Reader #0: FT SCR2000 0
Reader #1: FT SCR2000 1
Reader #2: Generic Usb Smart Card Reader 0
Please disconnect battery and USB cable.
eMMC interface selected.
Connecting...
ERROR[001]: Can not connect. No target device present.
Please disconnect battery and USB cable.
eMMC interface selected.
Connecting...
ERROR[001]: Can not connect. No target device present.[/SPOILER]
отключил box и программу, подключил box и программу и при первом подключении через castom setings или через профиль прога( box ) увидела flash. Сразу слил с него все.
Welcome to Medusa Pro Software version 1.2.3.
Started.
Reader #0: FT SCR2000 0
Reader #1: FT SCR2000 1
Reader #2: Generic Usb Smart Card Reader 0
Reader #3: Generic Usb Smart Card Reader 1
Please disconnect battery and USB cable.
Selected device model: LG D295.
Selected file: I:/Medusa Pro Software/firmwareFolder/LG_D295.srf.
eMMC interface selected.
Connecting...
Device : Hynix eMMC H4G1d
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 90014A4834473164040503A1BF41918B
Manufacturer ID : 0X90
Device/BGA : BGA(Discrete embeded)
OEM/Application ID : 0X4A
Product name : H4G1d
Product revision : 0.5
Product serial number : (hex)3A1BF41
Manufacturing date : 09/2014
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFFFFFFFEF8A4040D3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Boot partition enable : Device not boot enabled (default)
Partition config : 00000000
Backup EXT_CSD saved to file I:/Medusa Pro Software/EXT_CSD Backups/H4G1d_14_11_2016_15_40_40.bin.
Connect successful.
---------------------------------------------------------------
EXT_CSD saved to file I:/Medusa Pro Software/D290N/EXT_CSD_14_11_2016_15_41_08.
Saving partition GPT to file... Done.
Saving partition modem to file... Done.
Saving partition sbl1 to file... Done.
Saving partition rpm to file... Done.
Saving partition tz to file... Done.
Saving partition sdi to file... Done.
Saving partition aboot to file... Done.
Saving partition rpmb to file... Done.
Saving partition tzb to file... Done.
Saving partition abootb to file... Done.
Saving partition pad to file... Done.
Saving partition modemst1 to file... Done.
Saving partition modemst2 to file... Done.
Saving partition misc to file... Done.
Saving partition persist to file... Done.
Saving partition laf to file... Done.
Saving partition boot to file... Done.
Saving partition recovery to file... Done.
Saving partition fsg to file... Done.
Saving partition fsc to file... Done.
Saving partition ssd to file... Done.
Saving partition DDR to file... Done.
Saving partition encrypt to file... Done.
Saving partition rct to file... Done.
Saving partition drm to file... Done.
Saving partition sns to file... Done.
Saving partition factory to file... Done.
Saving partition fota to file... Done.
Saving partition sbl1b to file... Done.
Saving partition mpt to file... Done.
Saving partition cust to file... Done.
Saving partition eksst to file... Done.
Saving partition grow to file... Done.
Writting to file is finished.
SW: 1.2.3; FW: 1.14.
Disconnected
Gосле залил прошивку через factory repair
Welcome to Medusa Pro Software version 1.2.3.
Started.
Reader #0: FT SCR2000 0
Reader #1: FT SCR2000 1
Reader #2: Generic Usb Smart Card Reader 0
Reader #3: Generic Usb Smart Card Reader 1
Please disconnect battery and USB cable.
Selected device model: LG D290N.
Selected file: I:/Medusa Pro Software/D290N/LG_D290N.srf.
eMMC interface selected.
Connecting...
Device : Hynix eMMC H4G1d
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 90014A4834473164040503A1BF41918B
Manufacturer ID : 0X90
Device/BGA : BGA(Discrete embeded)
OEM/Application ID : 0X4A
Product name : H4G1d
Product revision : 0.5
Product serial number : (hex)3A1BF41
Manufacturing date : 09/2014
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFFFFFFFEF8A4040D3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Boot partition enable : Device not boot enabled (default)
Partition config : 00000000
Backup EXT_CSD saved to file I:/Medusa Pro Software/EXT_CSD Backups/H4G1d_14_11_2016_16_01_10.bin.
Connect successful.
---------------------------------------------------------------
Opening C:/Downloads/D290n10d_00.kdz file...
Writting. Please wait...
Writting partition PrimaryGPT... Done.
Writting partition modem... Done.
Writting partition sbl1... Done.
Writting partition rpm... Done.
Writting partition tz... Done.
Writting partition sdi... Done.
Writting partition aboot... Done.
Writting partition rpmb... Done.
Writting partition tzb... Done.
Writting partition abootb... Done.
Writting partition persist... Done.
Writting partition laf... Done.
Writting partition boot... Done.
Writting partition recovery... Done.
Writting partition factory... Done.
Writting partition sbl1b... Done.
Writting partition cust... Done.
Writting partition system... Done.
Writting partition system... Done.
Writting partition system... Done.
Writting partition system... Done.
Writting partition system... Done.
Writting partition system... Done.
Writting partition system... Done.
Writting partition system... Done.
Writting partition system... Done.
Writting partition system... Done.
Writting partition system... Done.
Writting partition system... Done.
Writting partition BackupGPT... Done.
Writting is finished.
SW: 1.2.3; FW: 1.14.
Disconnected
Телефон так и не включился и не прошился ,диспетчере задач видит как Qualcomm HS-USB QDLoader 9008.
по факту medusa pro ни чего не записал во flash
попробовал записать бэкап в телефон и опять ошибка
Welcome to Medusa Pro Software version 1.2.3.
Started.
Reader #0: FT SCR2000 0
Reader #1: FT SCR2000 1
Reader #2: Generic Usb Smart Card Reader 0
Reader #3: Generic Usb Smart Card Reader 1
Please disconnect battery and USB cable.
Selected device model: LG D290N.
Selected file: I:/Medusa Pro Software/D290N/LG_D290N.srf.
eMMC interface selected.
Connecting...
Device : Hynix eMMC H4G1d
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 90014A4834473164040503A1BF41918B
Manufacturer ID : 0X90
Device/BGA : BGA(Discrete embeded)
OEM/Application ID : 0X4A
Product name : H4G1d
Product revision : 0.5
Product serial number : (hex)3A1BF41
Manufacturing date : 09/2014
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFFFFFFFEF8A4040D3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Boot partition enable : Device not boot enabled (default)
Partition config : 00000000
Backup EXT_CSD saved to file I:/Medusa Pro Software/EXT_CSD Backups/H4G1d_14_11_2016_16_40_55.bin.
Connect successful.
---------------------------------------------------------------
Writting partition GPT to buffer... Done.
Writting partition modem to buffer... Done.
Writting partition sbl1 to buffer... Done.
Writting partition rpm to buffer... Done.
Writting partition tz to buffer... Done.
Writting partition sdi to buffer... Done.
Writting partition aboot to buffer... Done.
Writting partition rpmb to buffer... Done.
Writting partition tzb to buffer... Done.
Writting partition abootb to buffer... Done.
Writting partition pad to buffer... Done.
Writting partition modemst1 to buffer... Done.
Writting partition modemst2 to buffer... Done.
Writting partition misc to buffer... Done.
Writting partition persist to buffer... Done.
Writting partition laf to buffer... Done.
Writting partition boot to buffer... Done.
Writting partition recovery to buffer... Done.
Writting partition fsg to buffer... Done.
Writting partition fsc to buffer... Done.
Writting partition ssd to buffer... Done.
Writting partition DDR to buffer... Done.
Writting partition encrypt to buffer... Done.
Writting partition rct to buffer... Done.
Writting partition drm to buffer... Done.
Writting partition sns to buffer... Done.
Writting partition factory to buffer... Done.
Writting partition fota to buffer... Done.
Writting partition sbl1b to buffer... Done.
Writting partition mpt to buffer... Done.
Writting partition cust to buffer... Done.
Writting partition eksst to buffer... Done.
Writting partition grow to buffer... Done.
SW: 1.2.3; FW: 1.14.
Writting. Please wait... Writting partition GPT...
ERROR[012]: Write error.
At sector 0
Disconnected
из всего проделоного понял прогер пока умеет подключаться к телефонам на прямую и считывать инфу а вот записать не может( не дружит с флэшками hunix и sandisc)
новый софт medusa pro 1.2.4 не решил проблему с телефоном
при первом подключении напрямую к памяти отказывался подключаться
Welcome to Medusa Pro Software version 1.2.3.
Started.
Reader #0: FT SCR2000 0
Reader #1: FT SCR2000 1
Reader #2: Generic Usb Smart Card Reader 0
Please disconnect battery and USB cable.
eMMC interface selected.
Connecting...
ERROR[001]: Can not connect. No target device present.
Please disconnect battery and USB cable.
eMMC interface selected.
Connecting...
ERROR[001]: Can not connect. No target device present.[/SPOILER]
отключил box и программу, подключил box и программу и при первом подключении через castom setings или через профиль прога( box ) увидела flash. Сразу слил с него все.
Welcome to Medusa Pro Software version 1.2.3.
Started.
Reader #0: FT SCR2000 0
Reader #1: FT SCR2000 1
Reader #2: Generic Usb Smart Card Reader 0
Reader #3: Generic Usb Smart Card Reader 1
Please disconnect battery and USB cable.
Selected device model: LG D295.
Selected file: I:/Medusa Pro Software/firmwareFolder/LG_D295.srf.
eMMC interface selected.
Connecting...
Device : Hynix eMMC H4G1d
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 90014A4834473164040503A1BF41918B
Manufacturer ID : 0X90
Device/BGA : BGA(Discrete embeded)
OEM/Application ID : 0X4A
Product name : H4G1d
Product revision : 0.5
Product serial number : (hex)3A1BF41
Manufacturing date : 09/2014
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFFFFFFFEF8A4040D3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Boot partition enable : Device not boot enabled (default)
Partition config : 00000000
Backup EXT_CSD saved to file I:/Medusa Pro Software/EXT_CSD Backups/H4G1d_14_11_2016_15_40_40.bin.
Connect successful.
---------------------------------------------------------------
EXT_CSD saved to file I:/Medusa Pro Software/D290N/EXT_CSD_14_11_2016_15_41_08.
Saving partition GPT to file... Done.
Saving partition modem to file... Done.
Saving partition sbl1 to file... Done.
Saving partition rpm to file... Done.
Saving partition tz to file... Done.
Saving partition sdi to file... Done.
Saving partition aboot to file... Done.
Saving partition rpmb to file... Done.
Saving partition tzb to file... Done.
Saving partition abootb to file... Done.
Saving partition pad to file... Done.
Saving partition modemst1 to file... Done.
Saving partition modemst2 to file... Done.
Saving partition misc to file... Done.
Saving partition persist to file... Done.
Saving partition laf to file... Done.
Saving partition boot to file... Done.
Saving partition recovery to file... Done.
Saving partition fsg to file... Done.
Saving partition fsc to file... Done.
Saving partition ssd to file... Done.
Saving partition DDR to file... Done.
Saving partition encrypt to file... Done.
Saving partition rct to file... Done.
Saving partition drm to file... Done.
Saving partition sns to file... Done.
Saving partition factory to file... Done.
Saving partition fota to file... Done.
Saving partition sbl1b to file... Done.
Saving partition mpt to file... Done.
Saving partition cust to file... Done.
Saving partition eksst to file... Done.
Saving partition grow to file... Done.
Writting to file is finished.
SW: 1.2.3; FW: 1.14.
Disconnected
Gосле залил прошивку через factory repair
Welcome to Medusa Pro Software version 1.2.3.
Started.
Reader #0: FT SCR2000 0
Reader #1: FT SCR2000 1
Reader #2: Generic Usb Smart Card Reader 0
Reader #3: Generic Usb Smart Card Reader 1
Please disconnect battery and USB cable.
Selected device model: LG D290N.
Selected file: I:/Medusa Pro Software/D290N/LG_D290N.srf.
eMMC interface selected.
Connecting...
Device : Hynix eMMC H4G1d
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 90014A4834473164040503A1BF41918B
Manufacturer ID : 0X90
Device/BGA : BGA(Discrete embeded)
OEM/Application ID : 0X4A
Product name : H4G1d
Product revision : 0.5
Product serial number : (hex)3A1BF41
Manufacturing date : 09/2014
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFFFFFFFEF8A4040D3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Boot partition enable : Device not boot enabled (default)
Partition config : 00000000
Backup EXT_CSD saved to file I:/Medusa Pro Software/EXT_CSD Backups/H4G1d_14_11_2016_16_01_10.bin.
Connect successful.
---------------------------------------------------------------
Opening C:/Downloads/D290n10d_00.kdz file...
Writting. Please wait...
Writting partition PrimaryGPT... Done.
Writting partition modem... Done.
Writting partition sbl1... Done.
Writting partition rpm... Done.
Writting partition tz... Done.
Writting partition sdi... Done.
Writting partition aboot... Done.
Writting partition rpmb... Done.
Writting partition tzb... Done.
Writting partition abootb... Done.
Writting partition persist... Done.
Writting partition laf... Done.
Writting partition boot... Done.
Writting partition recovery... Done.
Writting partition factory... Done.
Writting partition sbl1b... Done.
Writting partition cust... Done.
Writting partition system... Done.
Writting partition system... Done.
Writting partition system... Done.
Writting partition system... Done.
Writting partition system... Done.
Writting partition system... Done.
Writting partition system... Done.
Writting partition system... Done.
Writting partition system... Done.
Writting partition system... Done.
Writting partition system... Done.
Writting partition system... Done.
Writting partition BackupGPT... Done.
Writting is finished.
SW: 1.2.3; FW: 1.14.
Disconnected
Телефон так и не включился и не прошился ,диспетчере задач видит как Qualcomm HS-USB QDLoader 9008.
по факту medusa pro ни чего не записал во flash
попробовал записать бэкап в телефон и опять ошибка
Welcome to Medusa Pro Software version 1.2.3.
Started.
Reader #0: FT SCR2000 0
Reader #1: FT SCR2000 1
Reader #2: Generic Usb Smart Card Reader 0
Reader #3: Generic Usb Smart Card Reader 1
Please disconnect battery and USB cable.
Selected device model: LG D290N.
Selected file: I:/Medusa Pro Software/D290N/LG_D290N.srf.
eMMC interface selected.
Connecting...
Device : Hynix eMMC H4G1d
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 90014A4834473164040503A1BF41918B
Manufacturer ID : 0X90
Device/BGA : BGA(Discrete embeded)
OEM/Application ID : 0X4A
Product name : H4G1d
Product revision : 0.5
Product serial number : (hex)3A1BF41
Manufacturing date : 09/2014
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFFFFFFFEF8A4040D3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Boot partition enable : Device not boot enabled (default)
Partition config : 00000000
Backup EXT_CSD saved to file I:/Medusa Pro Software/EXT_CSD Backups/H4G1d_14_11_2016_16_40_55.bin.
Connect successful.
---------------------------------------------------------------
Writting partition GPT to buffer... Done.
Writting partition modem to buffer... Done.
Writting partition sbl1 to buffer... Done.
Writting partition rpm to buffer... Done.
Writting partition tz to buffer... Done.
Writting partition sdi to buffer... Done.
Writting partition aboot to buffer... Done.
Writting partition rpmb to buffer... Done.
Writting partition tzb to buffer... Done.
Writting partition abootb to buffer... Done.
Writting partition pad to buffer... Done.
Writting partition modemst1 to buffer... Done.
Writting partition modemst2 to buffer... Done.
Writting partition misc to buffer... Done.
Writting partition persist to buffer... Done.
Writting partition laf to buffer... Done.
Writting partition boot to buffer... Done.
Writting partition recovery to buffer... Done.
Writting partition fsg to buffer... Done.
Writting partition fsc to buffer... Done.
Writting partition ssd to buffer... Done.
Writting partition DDR to buffer... Done.
Writting partition encrypt to buffer... Done.
Writting partition rct to buffer... Done.
Writting partition drm to buffer... Done.
Writting partition sns to buffer... Done.
Writting partition factory to buffer... Done.
Writting partition fota to buffer... Done.
Writting partition sbl1b to buffer... Done.
Writting partition mpt to buffer... Done.
Writting partition cust to buffer... Done.
Writting partition eksst to buffer... Done.
Writting partition grow to buffer... Done.
SW: 1.2.3; FW: 1.14.
Writting. Please wait... Writting partition GPT...
ERROR[012]: Write error.
At sector 0
Disconnected
из всего проделоного понял прогер пока умеет подключаться к телефонам на прямую и считывать инфу а вот записать не может( не дружит с флэшками hunix и sandisc)
новый софт medusa pro 1.2.4 не решил проблему с телефоном
Вложения
Последнее редактирование:
