Вот лог после залития FULLA
The same area.
Opening C:/Users/Zelek/Desktop/LG_E612_FullFlash.bin file...
Write data verification is enabled.
Writing. Please wait... Done.
Поддержка Medusa что делаю не так???
SW: 1.3.8; FW: 1.18.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 3.3V
Bus Mode : 4
Bus speed : Auto
Connecting...
Device : Samsung eMMC SJS00M
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 150100534A5330304D00F69C653259CF
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : SJS00M
Product revision : 0.0
Product serial number : (hex) F69C6532
Manufacturing date : 05/2022
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFE78A404057
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.5 (for MMC v4.41)
Erase block size : 512 Kbytes
Boot1 size : 1024 Kbytes
Boot2 size : 1024 Kbytes
RPMB size : 128 Kbytes
Partition config : 00000000
Boot partition enable : Device not boot enabled (default) (Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1908736 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/SJS00M_04_06_2017_08_43_13.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.3.8; FW: 1.18.
P00: FSBL (00000001, 00000028)
P01: QCSBL (00000029, 000007D7)
P02: OSBL (00000800, 00000800)
P03: APPSBL (00020000, 00002000)
P04: PART_2C (00022000, 00002000)
P05: PART_58 (00024000, 00002000)
P06: PART_77 (00026000, 0000C000)
P07: BOOT (00032000, 00004000)
P08: MODEM_ST1 (00036000, 00002000)
P09: MODEM_ST2 (00038000, 00002000)
P10: AMSS (0003A000, 0000E000)
P11: PART_6C (00048000, 0000E000)
P12: EXT2FS (00056000, 00113000)
P13: EXT2FS (0016A000, 00004000)
P14: EXT2FS (0016E000, 00050000)
P15: PART_60 (001BE000, 00004000)
P16: EXT2FS (001C2000, 00004000)
P17: PART_6B (001C6000, 00006000)
P18: EXT2FS (001CC000, 00562800)
P19: PART_FF (00730000, 00002000)
P20: PART_FF (00732000, 00000800)
P21: EXT2FS (00734000, 00008000)
