Lumia 635 Dead Boot

[xserver]

ТА поступил с симтомами не включается, при подключении к компу видится как Care Suite Emergency Connectivity, при прошивке с помощь ATF вот такой лог
[DEAD BOOT REPAIR via USB is SUPPORTED]

======================================================
Windows Phone 8/8.1/10 Lumia Flasher
======================================================

If the Phone is ALIVE
1. Power On the Phone and Connect it to the USB Port

If the Phone is DEAD
1. Connect Phone to the USB Port
2. Press and Hold the VOLUME DOWN and POWER Buttons
3. Wait until the Phone Vibrates Shortly...
4. Stop Pressing the Buttons...

If the Phone is DEAD BOOT
1. Connect Phone to the USB Port
2. Install Correct Drivers:
"Nokia Emergency Connectivity" Located at:

C:\AdvanceBox Turbo Flasher\Driver\NOKIA_X2_USB_DRIVERS\
======================================================

Recovery Handle Found! - (WinUSB)
PBL Emergency Download Detected

Start Sending Firehose Loader...
Firehose Loader Sent!
Executing Firehose Loader...
Start Processing Firehose Payload...
MSG_SIGNATURE Sent....
далие на этом висит и не какой реакции, помогите советом

 

[flashmax]

пробуйте другой продукт, например бест