Приветствую!
Имеется оранжевый mxkey и ufs. стоят последние версии. win7 x64
Проблема в том, что ufs работает без проблем. Шьет бб5. А через mobileex 3.5 не прошить, не RPL забекапить не получается. Всегда работал UFS-кой, а свисток просто валялся... Тут понадобился и ...
Информацию с телефона читает имей, продукт коде... шить не шьет, пишет всегда одно и тоже
NK module version: 1.18
NK applet version: 00.20
NK module ready.
Please "Scan" or "BUS check" before any operation ...
Нажимаю "BUS check"
MXKEY Serial: ***********
Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Driver: UFS2XX, ver: 3.8.30.0 , NTMP ver: 2.8.30.9
Module ver: 1.0.0.17602(14-06-2011), Library ver: 1.0.0.14397(09-05-2013)
Boot error: 56 32 2E 38
- Repeat the procedure. Sometimes it is a matter of temporary communication problem or similar.
- Check that all used cable are solid without any visible damage and have good contact. If possible, try with other cables.
- On rare occasions phone might be damaged or dead. So, if possible, try with another phone.
вот и не пойму, что со свистком не так...