вот лог с старым файлом
--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 17 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0001
BB_CPU_SN : 20AF65FA9F21BEFF129BD9C012EBF4B5
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : Bree.22.00.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Bree.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00DB , [MX] MX25U3235E
[0] : FLASH_DIE : 00C2 0025 0036 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A6000-0x003F3FFF , LEN : 0x0004E000
SecureDecrypt : RM-944_ROM_eMP_22.00.11
SecureDecrypt : RM-944_VIVA_eMP_22.00.11
SecureDecrypt : RM-944_LANG_PACK_ROM_EI_eMP_20.06.11
SecureDecrypt : RM-944_CUSTPACK_ROM_ME_APAC_ID_eMP_22.00.11
SecureDecrypt : RM-944_JUMP_TABLE_ME_APAC_ID_eMP_22.00.11
OVRLP : 000069B900000001
PHPID : Bree.22.00.11.p1
=== Backup Enabled
Reading RPL backup...
Control Block Validation (Security Test) :
CBR is Ok, match with BB SN. Phone Security is Alive
Mobile Info :
IMEI : 35xxxxxxxxxxxxxx
BBUID : 20AF65FA9F21BEFF129BD9C012EBF4B5
SimLock Info :
STATE : OPENED ( NOT LOCKED )
RPL Saved to : 357xxxxxxxxxxxxx_MTK_2nd.mtsec
=== Backup
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
[ERROR] : DA_NOR_PROGRAM_REGION_IS_OVERLAP
Error While erase area!!!
Flashing failed!
Connect phone on selected interface...