Nokia 200 Контакт сервис

  • Автор темы Автор темы ibamursir
  • Дата начала Дата начала
I

ibamursir

Гость
    Автор Темы: ibamursir
  • #1
ERROR: Active Phone Handle was NOT DETECTED
======================================================

TIP: Make sure that Phone USB Connection Mode is
OVI Suite Mode
or
PC Suite Mode

прошил телефон выдал вот эту ошибку,телефон включил контакт сервис выходит.
 
Через что шили, какую версию вливали. и вообще дайте логи.
 
    Автор Темы: ibamursir
  • #3
телефон контакт сервисом пришел к нам,я прошил версией rm761__10.60
 
    Автор Темы: ibamursir
  • #5
Через ATF
Number of Image Files: 3

Processing Image File :
rm761__10.60.mcusw
Processing Image File :
rm761__10.60.ppm_i1
Processing Image File :
rm761__10.60.image_i1_059J4M2_005


AUTO SELECTED DEAD USB FLASHING...


1. Remove USB and Battery...
2. Insert USB.
3. Insert Battery. (Some phones boot automatically)
4. Please Power on phone shortly...


Infineon USB Boot: F00A1FB300020303010100FF
Sending PBL...
PBL Successfully Sent...
Sending SBL...
SBL Successfully Sent...
Setting Transmission Speed Done...
Flash Chip Manufacturer: Intel Electronics Corp.
Flash Boot Successful...



Sections : 04
Current File : rm761__10.60.mcusw
Compile Name: rm761__10.60.mcusw_ebl_psi.fls
Image Type : Main Firmware
Data Size : 26480008 Bytes

Sending Certificate Block
FIRMWARE Certificate Block Sent Successfully...
Processing Section 01 of 04
FIRMWARE Erase Block: 0x40000000~0x4001FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 131072 bytes
Data Checksum: C1BC
Uploading Data Blocks to phone...
Block Write Successful...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 02 of 04
FIRMWARE Erase Block: 0x40040000~0x4005FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 131072 bytes
Data Checksum: 7A7A
Uploading Data Blocks to phone...
Block Write Successful...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 03 of 04
FIRMWARE Erase Block: 0x40060000~0x4015FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 1048576 bytes
Data Checksum: BE34
Uploading Data Blocks to phone...
Block Write Successful...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 04 of 04
FIRMWARE Erase Block: 0x40280000~0x41A7FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 25165824 bytes
Data Checksum: 2A55
Uploading Data Blocks to phone...
Block Write Successful...
FIRMWARE Data Blocks uploaded to phone...
Data Verification Successful...


Sections : 01
Current File : rm761__10.60.ppm_i1
Compile Name: package_i1.ppm_ebl_psi.fls
Image Type : PPM Image
Data Size : 5749144 Bytes

Sending Certificate Block
PPM Certificate Block Sent Successfully...
Processing Section 01 of 01
PPM Erase Block: 0x41A80000~0x421BFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 5745800 bytes
Data Checksum: D330
Uploading Data Blocks to phone...
Block Write Successful...
PPM Data Blocks uploaded to phone...
Data Verification Successful...


Sections : 01
Current File : rm761__10.60.image_i1_059J4M2_005
Compile Name: package_i1_059J4M2.image.fls
Image Type : CONTENT Package
Data Size : 14683408 Bytes

Sending Certificate Block
CONTENT Certificate Block Sent Successfully...
Processing Section 01 of 01
CONTENT Erase Block: 0x421C0000~0x43E1FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 14680064 bytes
Data Checksum: 8765
Uploading Data Blocks to phone...
Block Write Successful...
CONTENT Data Blocks uploaded to phone...
Data Verification Successful...
Total Flashing Time (Erase + Flashing) : 00:04:08
(Booting time is NOT Included)

Waiting for Phone to Start-Up..(Max 150 seconds)



WARNING: Phone is not in the Required Mode...
Disconnect the Phone and Power it Up Manually.


Scanning USB Ports...

======================================================
ERROR: Active Phone Handle was NOT DETECTED
======================================================

TIP: Make sure that Phone USB Connection Mode is
OVI Suite Mode
or
PC Suite Mode
 
при вклечении телефона без сим карты выходит надпись вкл без сим карты?
 
    Автор Темы: ibamursir
  • #7
нет,при вставлений батарейки сразу включается и надпись белым контакт сервис
 
проблема не в прошивке, и не в сертификате, а в железе, вам поможет в СЦ !
 
    Автор Темы: ibamursir
  • #9
телефон открыли там все нормально не воды не удара,может быть из-за процессора?
 
    Автор Темы: ibamursir
  • #11
всем спасибо! тема закрыто.телефон забрал клиент
 
Куча таких телефонов сделал когда ставишь батарейку телефон сам включается на черном экране надпись контакт сервис прошивать надо через BEST про бывал прошивать через ATF результата нет так что надо про бывать через BEST и X2.02 тоже самое
 

Похожие Темы

Назад
Верх Низ