M
muslim.1983
Гость
- #1
Автор Темы:
muslim.1983
Connecting to the target...OK
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x4BA00477, IR Length = 0x04 bits
Device on TAP #1: ID = 0x207D00E1, IR Length = 0x0B bits
Total IR length: 0x000F bits
Analizing IDCODE(s) of the JTAG scan chain:
1. 0x4BA00477: Generic CORTEX-A9/A15 Core Based Target
2. 0x207D00E1: Qualcomm MSM8227, H/W Rev. #2
Selected Resurrector: [Nokia Lumia 520 V1.0.5149.18900]
Connecting to the dead body...OK
Detected dead body ID: 0x207D00E1 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR(0x44): Communication is not established. Terminating.
што делат незнаю поделитес пожалуста
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x4BA00477, IR Length = 0x04 bits
Device on TAP #1: ID = 0x207D00E1, IR Length = 0x0B bits
Total IR length: 0x000F bits
Analizing IDCODE(s) of the JTAG scan chain:
1. 0x4BA00477: Generic CORTEX-A9/A15 Core Based Target
2. 0x207D00E1: Qualcomm MSM8227, H/W Rev. #2
Selected Resurrector: [Nokia Lumia 520 V1.0.5149.18900]
Connecting to the dead body...OK
Detected dead body ID: 0x207D00E1 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR(0x44): Communication is not established. Terminating.
што делат незнаю поделитес пожалуста
