ТА после падения. Замена тачскрина, не работают обе камеры.
При выборе приложения Камера висит на черном экране.
Результат Self Test: не проходит Camera interface test, остальные ОК.
Result:
MINOR
Result (detailed view):
Camera Model ID[2], Major Rev, Minor Rev, Manufacturer ID, Serial Number[10], Sent Frames, Received Packets[2], CRC Status[4], ECC Status
[4], NVM checksum[2], NVM calculated checksum[2]
66 66 2 4 16 48 50 48 49 48 54 52 51 48 48 5 0 0 0 0 0 0 0 0 0 0 60 230 60 230
Data description:
Detailed result contains following information:
Camera Model ID (2 bytes, MSB first)
Camera major revision (1 byte)
Camera minor revision (1 byte)
Camera manufacturer ID (1 byte)
Camera serial number (10 ascii characters, if shorter filled with 0x00, by default string is NOT '\\0' terminated)
Number of sent image frames from camera (1 byte)
Number of received packets over CSI-2 data bus (2 bytes, MSB first)
CRC errors detected by the CSI-2 receiver (4 bytes, MSB first)
ECC errors detected by the CSI-2 receiver (4 bytes, MSB first)
Expected NVM checksum (2 bytes, MSB first)
Calculated NVM checksum (2 bytes, MSB first)
Камеры на замену нет, контакты осматривал. Есть возможность определить, кто виноват, камера или контроллер?
При выборе приложения Камера висит на черном экране.
Результат Self Test: не проходит Camera interface test, остальные ОК.
Result:
MINOR
Result (detailed view):
Camera Model ID[2], Major Rev, Minor Rev, Manufacturer ID, Serial Number[10], Sent Frames, Received Packets[2], CRC Status[4], ECC Status
[4], NVM checksum[2], NVM calculated checksum[2]
66 66 2 4 16 48 50 48 49 48 54 52 51 48 48 5 0 0 0 0 0 0 0 0 0 0 60 230 60 230
Data description:
Detailed result contains following information:
Camera Model ID (2 bytes, MSB first)
Camera major revision (1 byte)
Camera minor revision (1 byte)
Camera manufacturer ID (1 byte)
Camera serial number (10 ascii characters, if shorter filled with 0x00, by default string is NOT '\\0' terminated)
Number of sent image frames from camera (1 byte)
Number of received packets over CSI-2 data bus (2 bytes, MSB first)
CRC errors detected by the CSI-2 receiver (4 bytes, MSB first)
ECC errors detected by the CSI-2 receiver (4 bytes, MSB first)
Expected NVM checksum (2 bytes, MSB first)
Calculated NVM checksum (2 bytes, MSB first)
Камеры на замену нет, контакты осматривал. Есть возможность определить, кто виноват, камера или контроллер?
