Ошибка Error reading address 0x000C0000 Error Code:-206 Reason :PORT Read Error

[volshebnik123]

Флешка SDIN5D2-2G определяется нормально при считывании вываливается ошибка:
Error reading address 0x000C0000 Error Code:-206 Reason ORT Read Error
Retry reading address 0x000C0000 (Attempt #1) Что может быть?
EMMC CID : 45010053454D3032479012300ED68E84
EMMC CSD : D00F00320F5A03A5FFFFFCFF9240405A
Изготовитель eMMC: ID: 0045 , OEM ID: 0100
EMMC Date: 08/2011 Rev.0x90
EMMC NAME: SEM02G , S/N: 305139414
EMMC NAME (HEX): 53454D30324700
EMMC ROM1 (Main User Data) Capacity: 1868 MB
EMMC ROM2 (Boot Раздел 1) Емкость: 1024 kB
EMMC ROM3 (Boot Раздел 2) Емкость: 1024 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x03
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: SEM02G_ 305139414_20180417_1404.extcsd
Partition table scan:
GPT: not present
Found invalid GPT and valid MBR; converting MBR to GPT format
Detected 6 meta partitions :
Meta partition 0
Meta partition 16800
Meta partition 1E840
Meta partition 65080
Meta partition 7B900
Meta partition 93940
Real (Hardware) Disk/Image size: 3A6000 sectors 1.8 GiB
Soft (Partitioned) Disk/Image size: 3A5FBC sectors 1.8 GiB
Logical sector size: 0x200 bytes
Disk identifier (GUID): CF319000-7A95-E559-D2BF-2CDBB5834D03
First usable sector: 34
Last usable sector: 3825630
Found Data areas (firmware parts) count is: 8
Partition info successfully found
---------------------------------------------
P0 (PARTITION_P83) [0x1900000 0xa00000] Size: 10.0MB
P1 (PARTITION_P83) [0x2300000 0xa00000] Size: 10.0MB
P3 (PARTITION_P83) [0x1a730000 0x5a4d0000] Size: 1.410GB
P4 (PARTITION_P83) [0x2d02000 0x1006000] Size: 16.23MB
P5 (PARTITION_P83) [0x3d0a000 0x8d06000] Size: 141.23MB
P6 (PARTITION_P83) [0xca12000 0x2d0e000] Size: 45.54MB
P7 (PARTITION_P83) [0xf722000 0x3006000] Size: 48.23MB
------ Android information ------
---------------------------------------------
Сделано.

Z3X EasyJtag Box JTAG Софт версия. 2.9.0.0
Skip loading eMMC Addon Firmware
Напряжение подтяжки линии CMD :3269 mV
Напряжение активной линии CMD :3341 mV
Box IO Level:3300 mV
CLK Rate:21000 kHz
Bus Width:1bit,SDR
Reading 0x000080000000 (2.0GB) from 0x000000000000 ...ROM1 ( USER ROM)
Read Length has been corrected to 0x000074C00000 (1.824GB)...
Output file Sony prs-t1\backup\EMMC_ROM1_SEM02G_305139414_00000000_74C00000.bin
Error reading address 0x000C0000 Error Code:-206 Reason ORT Read Error
Retry reading address 0x000C0000 (Attempt #1)
Reading flash page stopped by user request
Сделано.

 

[volshebnik123]

Это происходит при считывании полного дампа , если считывать отдельные блоки ошибки нет