- #1
Автор Темы
Всем доброго времени суток.
Пришел Р5100 на замену еммс.
Вот лог чтения еммс:eMMC CID : 1501004D4147344641123A04DB488E92
eMMC CSD : D02701320F5903FFF6DBFFEF8A404066
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 08/2011 Rev.0x12
eMMC NAME: MAG4FA , S/N: 973396808
eMMC NAME (HEX): 4D4147344641
IC Names: Samsung , KLMAG4FEJA-B001/16GB @FBGA169
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Раздел 1) Емкость: 2048 kB
EMMC ROM3 (Boot Раздел 2) Емкость: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x03
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: MAG4FA_ 973396808_20181113_1727.extcsd
Сделано.
А при попытке сделать запись backup с поддержки выдает ошибку.
Real (Hardware) Disk/Image size: 43E000 sectors 2.1 GiB
Soft (Partitioned) Disk/Image size: 1DA9FBC sectors 14.8 GiB
Logical sector size: 0x200 bytes
Disk identifier (GUID): 52444E41-494F-2044-4D4D-43204449534B
First usable sector: 34
Last usable sector: 31104990
Processing file...G:\Jtag\Samsung\p5100\Samsung_P5100_XWALD7(4.0.3)_16GB_model_Dump_len_0x87C00000_OK\Samsung_P5100_XWALD7(4.0.3)_16GB_model_Dump_len_0x87C00000_OK\EMMC_ROM1_00000000_87C00000.bin
Writing as RAW data
Z3X EasyJtag Software ver. 3.3.0.0
Skip loading eMMC Addon Firmware
Напряжение подтяжки линии CMD :1835 mV
Напряжение активной линии CMD :3135 mV
Input file : G:\Jtag\Samsung\p5100\Samsung_P5100_XWALD7(4.0.3)_16GB_model_Dump_len_0x87C00000_OK\Samsung_P5100_XWALD7(4.0.3)_16GB_model_Dump_len_0x87C00000_OK\EMMC_ROM1_00000000_87C00000.bin
Writing 0087C00000 bytes to 0000000000... ROM1 (USER ROM)
Error writing address 0x00000000 Error Code:-8 Reason
ATA SND CRC Error
Retry writing address 0x0000000000 (Attempt #1)...
Retry failed at address 0x00000000 Error Code:-8 ReasonATA SND CRC Error
Retry writing address 0x0000000000 (Attempt #2)...
Retry failed at address 0x00000000 Error Code:-8 ReasonATA SND CRC Error
Retry writing address 0x0000000000 (Attempt #3)...
Retry failed at address 0x00000000 Error Code:-8 ReasonATA SND CRC Error
Retry writing address 0x0000000000 (Attempt #4)...
Retry failed at address 0x00000000 Error Code:-8 ReasonATA SND CRC Error
Retry writing address 0x0000000000 (Attempt #5)...
Retry failed at address 0x00000000 Error Code:-8 ReasonATA SND CRC Error
Write Block Failed, Reason: DATA SND CRC Error
Сделано.
Done with error(s)
Что я делаю не верно.
Заранее благодарю...
Пришел Р5100 на замену еммс.
Вот лог чтения еммс:eMMC CID : 1501004D4147344641123A04DB488E92
eMMC CSD : D02701320F5903FFF6DBFFEF8A404066
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 08/2011 Rev.0x12
eMMC NAME: MAG4FA , S/N: 973396808
eMMC NAME (HEX): 4D4147344641
IC Names: Samsung , KLMAG4FEJA-B001/16GB @FBGA169
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Раздел 1) Емкость: 2048 kB
EMMC ROM3 (Boot Раздел 2) Емкость: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x03
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: MAG4FA_ 973396808_20181113_1727.extcsd
Сделано.
А при попытке сделать запись backup с поддержки выдает ошибку.
Real (Hardware) Disk/Image size: 43E000 sectors 2.1 GiB
Soft (Partitioned) Disk/Image size: 1DA9FBC sectors 14.8 GiB
Logical sector size: 0x200 bytes
Disk identifier (GUID): 52444E41-494F-2044-4D4D-43204449534B
First usable sector: 34
Last usable sector: 31104990
Processing file...G:\Jtag\Samsung\p5100\Samsung_P5100_XWALD7(4.0.3)_16GB_model_Dump_len_0x87C00000_OK\Samsung_P5100_XWALD7(4.0.3)_16GB_model_Dump_len_0x87C00000_OK\EMMC_ROM1_00000000_87C00000.bin
Writing as RAW data
Z3X EasyJtag Software ver. 3.3.0.0
Skip loading eMMC Addon Firmware
Напряжение подтяжки линии CMD :1835 mV
Напряжение активной линии CMD :3135 mV
Input file : G:\Jtag\Samsung\p5100\Samsung_P5100_XWALD7(4.0.3)_16GB_model_Dump_len_0x87C00000_OK\Samsung_P5100_XWALD7(4.0.3)_16GB_model_Dump_len_0x87C00000_OK\EMMC_ROM1_00000000_87C00000.bin
Writing 0087C00000 bytes to 0000000000... ROM1 (USER ROM)
Error writing address 0x00000000 Error Code:-8 Reason
ATA SND CRC ErrorRetry writing address 0x0000000000 (Attempt #1)...
Retry failed at address 0x00000000 Error Code:-8 Reason
ATA SND CRC ErrorRetry writing address 0x0000000000 (Attempt #2)...
Retry failed at address 0x00000000 Error Code:-8 Reason
ATA SND CRC ErrorRetry writing address 0x0000000000 (Attempt #3)...
Retry failed at address 0x00000000 Error Code:-8 Reason
ATA SND CRC ErrorRetry writing address 0x0000000000 (Attempt #4)...
Retry failed at address 0x00000000 Error Code:-8 Reason
ATA SND CRC ErrorRetry writing address 0x0000000000 (Attempt #5)...
Retry failed at address 0x00000000 Error Code:-8 Reason
ATA SND CRC ErrorWrite Block Failed, Reason: DATA SND CRC Error
Сделано.
Done with error(s)
Что я делаю не верно.
Заранее благодарю...
