Что нового

Помогите Lumia 925 проблемы с EMMC

maax11

.
25/5/15
31
1
46
Lumia 925 проблемы с JTAG хочу сделать ему восстановление загрузчика.НО как только жму на Repair boot пишет ошибку внизу оставлю лог
ATF JTAG v1.0.15.8544 (17.06.2015)
Default language ID 0x0419, LR 14
JTAG Interface Connected, S/N 0x1C1F961C
Resetting and Exploring JTAG chain...2 Device(s)
Device #1 ID 0x4BA00477 IR4
Device #2 ID 0x706B40E1 IR11
Loading AFP (Please Wait)...OK
AFP revision 4, compiled 03.09.2014 15:38:00

==========================================================
Phone Type : Lumia 925, 925T
CPU Type : Qualcomm MSM8960
Storage Type: eMMC 16/32GB
Procedure : WP8 FFU Flasher via JTAG
More Info :
купить чтобы получить доступ к скрытому контенту.

==========================================================

1. Make sure JTAG Connection is 100% OK
2. Always Disconnect the Phone BATTERY
3. Connect USB Cable to Phone
4. Connect RJ-45 JTAG Cable to ATF Box
5. Select the Correct Phone Type RM-XXX
6. Use RESET JTAG button to check the JTAG Connection
7. Click RESTORE BOOT button to Start Boot Repairs
----------------------------------------------------------

Waiting for Device Connection 15 second(s)...OK
Resetting and Exploring JTAG chain...OK
Halting Core...Retry
Resetting and Exploring JTAG chain...OK
Halting Core...OK
Initializing Device...OK
Detecting eMMC #1 ID...eMMC Timeout, Status 0x00000000
Loading AFP (Please Wait)...OK
AFP revision 4, compiled 25.06.2014 23:39:00

==========================================================
Phone Type : Lumia 925 RM-892
CPU Type : Qualcomm MSM8960
Storage Type: eMMC 16/32GB
Boot Package: 3051.40000.1351.2004 (BIG BOOT)
==========================================================

1. Make sure JTAG Connection is 100% OK
2. Always Disconnect the Phone BATTERY
3. Connect USB Cable to Phone
4. Connect RJ-45 JTAG Cable to ATF Box
5. Select the Correct Phone Type RM-XXX
6. Use RESET JTAG button to check the JTAG Connection
7. Click RESTORE BOOT button to Start Boot Repairs
----------------------------------------------------------

Restore Boot...
Waiting for Device Connection 15 second(s)...OK
Resetting and Exploring JTAG chain...OK
Halting Core with 100ms Delay...OK
Initializing Device...OK
Detecting eMMC #1 ID...eMMC Timeout, Status 0x00000000
А это если я пытаюсь сделать ему Сustom R/W



Waiting for Device Connection 15 second(s)...OK
Resetting and Exploring JTAG chain...OK
Halting Core...Retry
Resetting and Exploring JTAG chain...No Devices found in Chain!
Waiting for Device Connection 15 second(s)...OK
Resetting and Exploring JTAG chain...OK
Halting Core...Retry
Resetting and Exploring JTAG chain...No Devices found in Chain!
Waiting for Device Connection 15 second(s)...OK
Resetting and Exploring JTAG chain...OK
Halting Core...Retry
Resetting and Exploring JTAG chain...OK
Halting Core...OK
Initializing Device...OK
Detecting eMMC #1 ID...eMMC Timeout, Status 0x00000000

Умерла флеш память или есть какое то программное решение? кстати при прошивке по usb тоже выдает ошибку
======================================================
Windows Phone 8/8.1/10 Lumia Flasher
======================================================

If the Phone is ALIVE
1. Power On the Phone and Connect it to the USB Port

If the Phone is DEAD
1. Connect Phone to the USB Port
2. Press and Hold the VOLUME DOWN and POWER Buttons
3. Wait until the Phone Vibrates Shortly...
4. Stop Pressing the Buttons...

If the Phone is DEAD BOOT
1. Connect Phone to the USB Port
2. Install Correct Drivers:
"Nokia Emergency Connectivity" Located at:

C:\AdvanceBox Turbo Flasher\Driver\NOKIA_X2_USB_DRIVERS\
======================================================

Recovery Handle Found! - (WinUSB)
Sending Factory Loader...
Loader Upload Done!
Executing Loader...
Start Loader Done!
Waiting for USB Cycle...
USB Cycle OK!
Device Factory Mode OK!
USB Reconfiguration Done...
eMMC Detected OK...

Extracting Partitions from FFU...
Looking for SBL1...
SBL1 OK
Looking for SBL2...
SBL2 OK
Looking for SBL3...
SBL3 OK
Looking for UEFI...
UEFI OK
Looking for RPM...
RPM OK
Looking for TZ...
TZ OK
Looking for WINSECAPP...
WINSECAPP OK
Extracting Partitions Done!
Start Writing eMMC Blocks at : 0x00000000
Start Writing eMMC Blocks at : 0x01000000
ERROR: eMMC WRITE Failed at 0x01000000
Skipping This Partition...
Start Writing eMMC Blocks at : 0x01200000
ERROR: eMMC WRITE Failed at 0x01200000
7E0D07000000577269746520756E7375636365737366756CF05B7E
ERROR: Flashing Failed!
 

Кто читал эту тему (всего: 5) Детально

Верх Низ