Разыскиваю распиновку JTAG для zte v956 и full
---------- Сообщение добавлено 11.11.2013 в 20:42 ---------- Предыдущее сообщение было от 06.11.2013 в 19:11 ----------
С помощью Signal Probing нашол распин zte v956, не нашол толко NRST, ресет праходит, но не видет флеш. Кто знает што делат далше??
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Custom Target: [ARM920T, 1.80V, TAP0]
Connecting to the target...OK
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x008E00E1, IR Length = 0x04 bits
Total IR length: 0x0004 bits
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Custom Target: [ARM920T, 1.80V, TAP0]
Resetting target...OK
STATUS: Target is halted.
R0 = 0x80000474 R6 = 0x80012FC4 R12 = 0x00000000
R1 = 0x80009BB0 R7 = 0x8000F8AC R13 = 0x80012F88
R2 = 0x5BE0CD19 R8 = 0x00000000 R14 = 0xFFFF6B5C
R3 = 0x80009DE4 R9 = 0xFFFFCE04 R15 = 0xFFFF71FC
R4 = 0x80004278 R10 = 0x00000AAE CPSR = 0x800000D3
R5 = 0x00000000 R11 = 0x00000014
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Custom Target: [ARM920T, 1.80V, TAP0]
Connecting to the ARM920T target...OK
Detected Target ID on TAP0: 0x008E00E1
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x12000000000000000000000100000000
Resurrection sequence started.
Establish communication with the phone...OK
Uploading loader data into memory...FAILED
ERROR: Memory access timed out.
---------- Сообщение добавлено 11.11.2013 в 20:42 ---------- Предыдущее сообщение было от 06.11.2013 в 19:11 ----------
С помощью Signal Probing нашол распин zte v956, не нашол толко NRST, ресет праходит, но не видет флеш. Кто знает што делат далше??
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Custom Target: [ARM920T, 1.80V, TAP0]
Connecting to the target...OK
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x008E00E1, IR Length = 0x04 bits
Total IR length: 0x0004 bits
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Custom Target: [ARM920T, 1.80V, TAP0]
Resetting target...OK
STATUS: Target is halted.
R0 = 0x80000474 R6 = 0x80012FC4 R12 = 0x00000000
R1 = 0x80009BB0 R7 = 0x8000F8AC R13 = 0x80012F88
R2 = 0x5BE0CD19 R8 = 0x00000000 R14 = 0xFFFF6B5C
R3 = 0x80009DE4 R9 = 0xFFFFCE04 R15 = 0xFFFF71FC
R4 = 0x80004278 R10 = 0x00000AAE CPSR = 0x800000D3
R5 = 0x00000000 R11 = 0x00000014
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Custom Target: [ARM920T, 1.80V, TAP0]
Connecting to the ARM920T target...OK
Detected Target ID on TAP0: 0x008E00E1
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x12000000000000000000000100000000
Resurrection sequence started.
Establish communication with the phone...OK
Uploading loader data into memory...FAILED
ERROR: Memory access timed out.
