ПОЛНЫЙ ЛОГ
------------------------------------
Welcome to Medusa Pro Software version 1.3.8.
Started.
Reader #0: Generic EMV Smartcard Reader 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1
Bus speed : Auto
Connecting...
Device : Sandisk eMMC SEM08G
Page size : 512 B
Block size : 512 B
Block count : 2097152
Size : 1024.00 MB
---------------------------------------------------------------
CID Info
CID : 45010053454D3038479040541BB17187
Manufacturer ID : 0X45
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : SEM08G
Product revision : 9.0
Product serial number : (hex) 40541BB1
Manufacturing date : 07/1998
---------------------------------------------------------------
CSD Info
CSD : D00F00320F5903FFFFFFFFFF92404011
CSD structure : CSD version No. 1.0
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 10 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.0 (for MMC v4.0)
Erase block size : 0 Kbytes
Boot1 size : 0 Kbytes
Boot2 size : 0 Kbytes
RPMB size : 0 Kbytes
Partition config : 00000000
Boot partition enable : Device not boot enabled (default) (Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
Max enhanced data size: 0 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/SEM08G_08_06_2017_14_13_42.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.3.8; FW: 1.18.
Selected pit file: D:/1/--- Samsung/T111/SER/GOYA3g.pit
Open file "D:/1/--- Samsung/T111/SER/BOOTLOADER_T111XXUAOE1_2832903_REV02_user_low_ship.tar.md5".
Writing MBR...
ERROR[012]: Write error.
At sector 0.
Disconnected.
--------------------------------
Так же есть еще странности.
На изображении с распиновкой указанн вольтаж в 3.3
При выставлении такого напряжения 3.3 и 3.0 оболочка теряет карту и закрывается.
Пробовал с всеми доступными напряжениями.
