Родного бэкапа нет.
Вот лог детекта и потом попытки что то читать с флеш
EMMC CID : 0600003136FFFFFFFFFF195C493934EA
EMMC CSD : 904F012A0F5903FFF6DBFFEF8A400098
Изготовитель eMMC: ID: 0006 , OEM ID: 0000
EMMC Date: 03/2017 Rev.0xFF
EMMC NAME: 16 , S/N: 425478457
EMMC NAME (HEX): 31362020202000
EMMC ROM1 (Main User Data) Capacity: 7504 MB
EMMC ROM2 (Boot Раздел 1) Емкость: 2048 kB
EMMC ROM3 (Boot Раздел 2) Емкость: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: Yes
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x03
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: 16 _ 425478457_20180313_1456.extcsd
mmc_read_blocks(0x0 , 1 ), Reason: PORT Read Error
mmc_read_blocks(0x1 , 1 ), Reason: PORT Read Error
mmc_read_blocks(0xEA7FFF , 1 ), Reason: PORT Read Error
Partition table scan:
GPT: not present
Сделано.
Z3X EasyJtag Box JTAG Софт версия. 2.9.0.0
Skip loading eMMC Addon Firmware
Напряжение подтяжки линии CMD :1804 mV
Напряжение активной линии CMD :1753 mV
Box IO Level:1800 mV
CLK Rate:21000 kHz
Bus Width:1bit,SDR
Can't access password locked device
Please, use Erase MMC Password option
Сделано.
