Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1
Bus speed : Auto
Connecting...
Device : Samsung eMMC Q7XSAB
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB
---------------------------------------------------------------
CID Info
CID : 15010051375853414201D22ADAB24231
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : Q7XSAB
Product revision : 0.1
Product serial number : (hex) D22ADAB2
Manufacturing date : 04/2015
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 2048 Kbytes
Boot2 size : 2048 Kbytes
RPMB size : 128 Kbytes
Partition config : 00001000
Boot partition enable : Boot partition 1 (Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 2539520 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Octoplus Pro JTAG Software/EXT_CSD Backups/Q7XSAB_01_06_2017_14_15_40.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.3.7; FW: 1.17.
P00: GPT (00000000, 00000100)
P01: TA (00000100, 00001000)
P02: sbl1 (00001100, 00000400)
P03: s1sbl (00001500, 00000200)
P04: aboot (00001700, 00000800)
P05: rpm (00001F00, 00000400)
P06: tz (00002300, 00000400)
P07: hyp (00002700, 00000400)
P08: alt_sbl1 (00002B00, 00000400)
P09: alt_s1sbl (00002F00, 00000200)
P10: alt_aboot (00003100, 00000800)
P11: alt_rpm (00003900, 00000400)
P12: alt_tz (00003D00, 00000400)
P13: alt_hyp (00004100, 00000400)
P14: fsg (00006000, 00000C00)
P15: modemst1 (00008000, 00000C00)
P16: modemst2 (0000A000, 00000C00)
P17: persist (0000C000, 00010000)
P18: modem (0001C000, 00020000)
P19: boot (0003C000, 00014000)
P20: rdimage (00050000, 00010000)
P21: FOTAKernel (00060000, 00014000)
P22: ssd (00074000, 00000010)
P23: DDR (00074010, 00000040)
P24: config (00074050, 00000400)
P25: LTALabel (00074450, 00008000)
P26: apps_log (0007E000, 00004000)
P27: oem (00082000, 0007C000)
P28: cache (000FE000, 00064000)
P29: userdata (00162000, 00832000)
P30: system (00994000, 004FBE00)
Backuping TA partition...
Opening C:/Program Files (x86)/Octoplus Pro JTAG Software/Backups/Q7XSAB_TA_0x100_0x1000_01_06_2017_14_15_40.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.3.7; FW: 1.17.
Flash geometry successfully changed.
Boot1, Boot2 size changed to 4 MB.
RPMB size changed to 4 MB.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1
Bus speed : Auto
Connecting...
Device : Samsung eMMC Q7XSAB
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB
---------------------------------------------------------------
CID Info
CID : 15010051375853414201D22ADAB24231
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : Q7XSAB
Product revision : 0.1
Product serial number : (hex) D22ADAB2
Manufacturing date : 04/2015
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : 00001000
Boot partition enable : Boot partition 1 (Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 2539520 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Octoplus Pro JTAG Software/EXT_CSD Backups/Q7XSAB_01_06_2017_14_15_59.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.3.7; FW: 1.17.
