полезная, если бы он сливался
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.13, JTAG Manager Version: 1.14
Selected Custom Target: [PXA270, 3.30V, TAP0]
Connecting to the target...OK
Set I/O Voltage reads as 3.30V, TCK Frequency is 800 kHz
Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x79265013, IR Length = 0x07 bits
Total IR length: 0x0007 bits
Reading Target Memory...ERROR
ERROR: No response from the RIFF Box.