Nokia 6720 не включается, ошибки при прошивке

[repinip]

Доброго времени суток, коллеги помогите решить проблему с данным девайсом, пришло тело не вкл, по словам клиента не падал, не тонул, потух сам по себе... Пробовал шить фениксом, пишет
--- Press phone's power button! ---
Failed to send wait request!
ERROR: Product recovery failed!
Unable to set the phone to flash mode. Unable to flash.
Starting to recover the phone
Recoverying phone
Initializing
Scanning image files...
ERROR: Unable to detect device 0x8401F145. Check USB connection!
Waiting for USB device...
1. Make sure USB cable, Battery and charger are removed from device.
2. Insert USB cable to device
3. Insert Battery to device
4. Insert Charger to device
--- Press phone's power button! ---
Boot rom detected. Continuing flashing...
Loading secondary boot code: 15168 bytes
Secondary boot loaded
Loading update server code: 722517 bytes
Update server loaded
UPS flashed and initialized. Continuing flashing...
Partitioning....
Partitioning complete
Erasing....
FUR: ALGO reported error in Control Frame. Unable to continue.
Error sending Message Block Command 0x50 - 0x8401F11F
Error in erasing CMT, possible reason Algo does not support watchdog updating.
Error when flashing Algo (0x84012281)
Unable to flash phone 0x84012281
Starting to recover the phone
Recoverying phone
Initializing
Scanning image files...
Waiting for USB device...
1. Make sure USB cable, Battery and charger are removed from device.
2. Insert USB cable to device
3. Insert Battery to device
4. Insert Charger to device
--- Press phone's power button! ---

Постоянное потребление тела при подключение к блоку 0,1 а ??
Для верности прогрел бут и газоо..
Помогите советом пожалуйста???

 

[serojko1]

как иариант попробуй по ф бас зацепить