Nokia N9 как разблокировать с помощью Best

[ilgez87051]

принесли телефон N9 при включении запрашивает юзер код, имею уфс и бест ,помогите с инструкциями?!

 

[Roman BB-5]

ПОКАЖИ ЛОгИ

 

[ilgez87051]

card found: S/N 55CC:0118
registered to: 55CC1254

Connect phone on selected interface...

Insert cable in to powered OFF phone! (Ignore if phone Connected)
Waiting for NOLO...
Connect in NOLO mode Ok!

Phone Info :
Type : RM-696 , HWRev : 1603
NOLO : 01/05/21
SWVer: DFL61_HARMATTAN_20.2011.40-4_PR_001
Device mode : Production mode

Read info Ok

Reset all flags...
Reset Done

Insert cable in to powered OFF phone! (Ignore if phone Connected)
Waiting for NOLO...
Connect in NOLO mode Ok!

Phone Info :
Type : RM-696 , HWRev : 1603
NOLO : 01/05/21
SWVer: DFL61_HARMATTAN_20.2011.40-4_PR_001
Device mode : Production mode

Read info Ok

Reset all flags...
Reset Done

Insert cable in to powered OFF phone! (Ignore if phone Connected)
Waiting for NOLO...
Connect in NOLO mode Ok!

Phone Info :
Type : RM-696 , HWRev : 1603
NOLO : 01/05/21
SWVer: DFL61_HARMATTAN_20.2011.40-4_PR_001
Device mode : Production mode

Read info Ok

Insert cable in to powered OFF phone! (Ignore if phone Connected)
Waiting for NOLO...
Connect in NOLO mode Ok!

Phone Info :
Type : RM-696 , HWRev : 1603
NOLO : 01/05/21
SWVer: DFL61_HARMATTAN_20.2011.40-4_PR_001
Device mode : Production mode

Read info Ok

Insert cable in to powered OFF phone! (Ignore if phone Connected)
Waiting for NOLO...
Connect in NOLO mode Ok!

Phone Info :
Type : RM-696 , HWRev : 1603
NOLO : 01/05/21
SWVer: DFL61_HARMATTAN_20.2011.40-4_PR_001
Device mode : Production mode

Read info Ok

Reset all flags...
Reset Done

Reset all flags...
Reset Done

Reset all flags...
Reset Done

Insert cable in to powered OFF phone! (Ignore if phone Connected)
Waiting for NOLO...
Maemo Phone not found

Phone disconected!

Connect phone on selected interface...

Insert cable in to powered OFF phone! (Ignore if phone Connected)
Waiting for NOLO...
Connect in NOLO mode Ok!

Phone Info :
Type : RM-696 , HWRev : 1603
NOLO : 01/05/21
SWVer: DFL61_HARMATTAN_20.2011.40-4_PR_001
Device mode : Production mode

Read info Ok

Reboot request sent
Wait until phone power up
Done

Phone disconected!

Connect phone on selected interface...

Insert cable in to powered OFF phone! (Ignore if phone Connected)
Waiting for NOLO...
Maemo Phone not found

 

[bacsic]

ilgez87051, в помощь.:icq20:
"Need Select MeeGo in generation
Need select MCU file
Press Check Files
Tick WIPE in Flash Settings
Press Flash
If phone connected - just wait till finish. If not - connect powered OFF phone. ( Power OFF it and wait near 20 seconds, after connect )
All is done, waiting till process finish.
Estimated time is - 8-12 minutes for process
After - Power On phone.
Go to : Settings - scrool down - select Reset, Select Clear Device.
Wait till phone finish. After phone shows big circle - wait until it turn off.
Power On phone. All is done. This will help refurbish device without eMMC.

Separate Wipe button ( again - RED BUTTON ) - need for others, special cases. For flashing - Wipe option in FLASH settings".

 

[Roman_BY]

Есть такой пункт как: Reset Full Factory Def

 

[ilgez87051]

в Best такого нет)))

 

[Roman_BY]

купите доступ для просмотра контента

.......имею уфс .......
там есть!
Оп,ошибочка! UFS RM-696 пока не поддерживает.
Но для сведения вот:

 

[ilgez87051]

там нет n9 rm-696 )))

 

[Roman_BY]

Bestа нет,(есть MX-HTI) там есть.Может попробовать прошить со всеми сбросами !?