Прошил сам через JTAG 1.0.11
Default language ID 0x0419
JTAG Interface Connected, S/N 0x80580EE2
Resetting and Exploring JTAG chain...1 Device(s)
Device #1 ID 0x007700E1 IR4
Loading AFP (Please Wait)...OK
AFP revision 4, compiled 28.09.2014 13:16:00
==========================================================
Phone Type : Nokia XL [RM-1030]
CPU Type : Qualcomm MSM8225
Storage TYpe : eMMC 4GB
Boot Package : Full Boot Restore
Firmware Version: 1.2.3.2
==========================================================
1. Make sure JTAG Connection is 100% OK
2. Always Disconnect the Phone BATTERY
3. Connect USB Cable to Phone
4. Connect RJ-45 JTAG Cable to ATF Box
5. Select the Correct Phone Type RM-XXX
6. Use RESET JTAG button to check the JTAG Connection
7. Click RESTORE BOOT button to Start Boot Repairs
----------------------------------------------------------
Resetting and Exploring JTAG chain...1 Device(s)
Device #1 ID 0x007700E1 IR4
Restore Boot...
Waiting for Device Connection 20 second(s)...OK
Resetting and Exploring JTAG chain...OK
Halting Core...Retry
Resetting and Exploring JTAG chain...OK
Halting Core...OK
Initializing Device...OK
Detecting EMMC #1 ID...1501004A3558574D42019B26D4B53146
Flash Description: Samsung J5XWMB, 3.64 GiB, SN 9B26D4B5, Mar 1998
Flash Write Protection: PERM
Partition Config: Boot from USER, Boot ACK OFF (0x38)
Boot Bus Config: x1 SDR, Bus Reset to x1 (0x00)
Testing Device Memory...OK
Sending Flash Loader...OK (92115 Op/Sec)
Restoring Partition #1...OK
Restoring Partition #2...OK
Restoring Partition #3...OK
Restoring Partition #4...OK
Restoring Partition #5...OK
Restoring Partition #6...OK
Restoring Partition #7...OK
Completed in 0h 0m 58s. Code Download Speed 353 KiB/sec.
Boot Restore Done!
=============================================================
Assemble Phone and Start Normally
If Phone cannot Start, perform USB Firmware Update Procedure
=============================================================
Тему можно закрывать
