- #1
Автор Темы
Здравствуйте Samsung gt-i8350 при включении первая заставка и вечная перезагрузка в режим прошивки не входит , компьютером не определяется . Пытался прошить riff box2 resurection прошивается но ситуация не меняется, прошиваю полный FUll ситуация тоже не меняется, делаю ему полное стирание но после этого он продолжает включаться до заставки и перегружаться, такое ощущение что по факту он ничего не пишет и не стирает.
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.54 (RIFFBOX2), JTAG Manager Version: 1.91
Selected Resurrector: [Samsung I8350 V1.0.4702.55486]
Connecting to the dead body...OK
Detected dead body ID: 0x27B360E1 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 12 MHz]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0000 (SEM08G, 0x0001D9800000 Bytes = 7.40 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0000 (SEM08G, 0x000000200000 Bytes = 2.00 MB)
Selected Resurrection Data for the eMMC Chip with Capacity = 7,40GB
Flashing the dead body...OK
Resurrection complete!
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.54 (RIFFBOX2), JTAG Manager Version: 1.91
Selected Resurrector: [Samsung I8350 V1.0.4702.55486]
Connecting to the dead body...OK
Detected dead body ID: 0x27B360E1 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 12 MHz]
Settings Code: 0x050100110000000000000000D9800000
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0000 (SEM08G, 0x0001D9800000 Bytes = 7.40 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0000 (SEM08G, 0x000000200000 Bytes = 2.00 MB)
Erasing FLASH1 memory from 0x000000000000 to 0x0001D97FFFFF...OK
Completed in 00:00:30.297 (Average Transfer Rate: 250.06 MB/s)
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.54 (RIFFBOX2), JTAG Manager Version: 1.91
Selected Resurrector: [Samsung I8350 V1.0.4702.55486]
Connecting to the dead body...OK
Detected dead body ID: 0x27B360E1 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 12 MHz]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0000 (SEM08G, 0x0001D9800000 Bytes = 7.40 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0000 (SEM08G, 0x000000200000 Bytes = 2.00 MB)
Selected Resurrection Data for the eMMC Chip with Capacity = 7,40GB
Flashing the dead body...OK
Resurrection complete!
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.54 (RIFFBOX2), JTAG Manager Version: 1.91
Selected Resurrector: [Samsung I8350 V1.0.4702.55486]
Connecting to the dead body...OK
Detected dead body ID: 0x27B360E1 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 12 MHz]
Settings Code: 0x050100110000000000000000D9800000
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0000 (SEM08G, 0x0001D9800000 Bytes = 7.40 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0000 (SEM08G, 0x000000200000 Bytes = 2.00 MB)
Erasing FLASH1 memory from 0x000000000000 to 0x0001D97FFFFF...OK
Completed in 00:00:30.297 (Average Transfer Rate: 250.06 MB/s)
