ПРинесли тело после самостоятельной попытки обновления. Тело прошивальщиком не видится. Есть рифф бокс, но при выборе модели C6603 не могу его законектить.
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Package: [XPERIA Z C6603 V1.04 by <Babak Nuri>]
Connecting to the target...OK
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x4BA00477, IR Length = 0x04 bits
Device on TAP #1: ID = 0x107190E1, IR Length = 0x0B bits
Total IR length: 0x000F bits
Analizing IDCODE(s) of the JTAG scan chain:
1. 0x4BA00477: Generic CORTEX-A9/A15 Core Based Target
2. 0x107190E1: Qualcomm APQ8064, H/W Rev. #1
это когда нажимаешь Analyze Jtag Chain
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Package: [XPERIA Z C6603 V1.04 by <Babak Nuri>]
Connecting to the dead body...ERROR
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
None is detected.
и вот когда нажимаешь connect and get id
Но когда выбираешь режим Castom Target Settings и ставишь проц cortex A15 тогда лог такой:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Custom Target: [CORTEX-A15, 1.80V, TAP0]
Connecting to the CORTEX-A15 target...OK
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
Target ID on TAP0: 0x4BA00477 - Connected OK
Но не доступен резуректор и не могу вычитать первых 128 мб...
Кто восстанавливал данное тело, отзовитесь, как его победить?Заранее спасибо)
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Package: [XPERIA Z C6603 V1.04 by <Babak Nuri>]
Connecting to the target...OK
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x4BA00477, IR Length = 0x04 bits
Device on TAP #1: ID = 0x107190E1, IR Length = 0x0B bits
Total IR length: 0x000F bits
Analizing IDCODE(s) of the JTAG scan chain:
1. 0x4BA00477: Generic CORTEX-A9/A15 Core Based Target
2. 0x107190E1: Qualcomm APQ8064, H/W Rev. #1
это когда нажимаешь Analyze Jtag Chain
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Package: [XPERIA Z C6603 V1.04 by <Babak Nuri>]
Connecting to the dead body...ERROR
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
None is detected.
и вот когда нажимаешь connect and get id
Но когда выбираешь режим Castom Target Settings и ставишь проц cortex A15 тогда лог такой:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Custom Target: [CORTEX-A15, 1.80V, TAP0]
Connecting to the CORTEX-A15 target...OK
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
Target ID on TAP0: 0x4BA00477 - Connected OK
Но не доступен резуректор и не могу вычитать первых 128 мб...
Кто восстанавливал данное тело, отзовитесь, как его победить?Заранее спасибо)
